Page 2
– Due care and attention is required when driving a motor vehicle. The operation of Box contents Functions any device whilst driving may cause a lack of attention, and pose a hazard to other 1. MFB (Multi-function Button) KS MyJack road users • 2. Micro USB charging port Charge cable •...
Page 3
Before you can use the MyJack wirelessly, it will need to be paired to your device. Getting started 1. Press and hold the MFB (1) for 6 seconds. This will turn the MyJack on and will To turn the MyJack on/off, press and hold the MFB (1) for 3 seconds •...
Page 4
MIC won’t be able to pick up your voice. If the KS MyJack doesn’t fit into your aux-in port because of a tight space you can insert the extension cable into the aux-in port and then connect the KS MyJack into the other end.
Page 5
Open up the MyJack. There are no user serviceable parts inside WARNING • Expose MyJack to extreme temperatures or rapid changes of hot to cold or vice versa • – Do not install over an airbag cover or within the airbag deployment zone Please DO: –...
Page 6
We hope you’ve now got all the information you need to get started, but if you’re having problems with anything, please feel free to contact us at: support@kitsound.co.uk Please do not attempt to open this product. There are no user serviceable parts inside. If your product has an embedded, non-replaceable battery, do not attempt to access or remove the battery.
Need help?
Do you have a question about the MYJACK and is the answer not in the manual?
Questions and answers