Download Print this page

NIMO IronMaid Operating Instructions Manual

Ironing module
Hide thumbs Also See for IronMaid:

Advertisement

Quick Links

IRONING MODULE
OPERATING INSTRUCTIONS

Advertisement

loading

Summary of Contents for NIMO IronMaid

  • Page 1 IRONING MODULE OPERATING INSTRUCTIONS...
  • Page 2: Table Of Contents

    These operating instructions describe the function and handling of the ironing module and include directions for installation and maintenance. February 2012 Nimo AB reserves the right to make necessary improvements and/or changes to this manual. Unapproved copying, changes, and distribution to unauthorised persons are prohibited. Nimoverken AB, BOX 124, S-548 22 Hova, Sweden...
  • Page 3: Important Safety Information

    Do not sit on the ironing board or use it as a storage area. The module should be installed or stored indoors. Follow NIMO’s instructions in the event of any repairs and replacement of parts. Adapt the ironing temperature and carefully follow the manufacturer’s instructions for ironing.
  • Page 4: Installation

    INSTALLATION Unpacking Remove all packaging material. Do not use sharp tools that could damage the ironing cupboard. Check that the product has not been damaged in transport. Any transport damage must be reported to the distributor within 7 days. After unpacking, check that the ironing module is free from defects. Damage, faults and any missing parts must be reported to the distributor immediately.
  • Page 5: Fixing To The Wall

    FIXING TO THE WALL 1 - Lift up the panel. 2 - Screw on the back through the big holes according to the above instruction. 3 - Replace the panel. Operating instructions...
  • Page 6: Handling

    Ironing WARNING! Read the safety instructions on page 3 before using the ironing module. Most of the settings and adjustments for IronMaid can be done with one hand. The controls are shown on the picture. Folding the board up/down Fold down the ironing board by holding the lower edge and pulling the board out.
  • Page 7: Service

    SERVICE New covers for the ironing board are available to buy from Nimoverken. CARE Cleaning A high-pressure cleaner may not be used! The ironing module should be cleaned using a mild soap solution and a damp cloth. The ironing board should be cleaned with a damp cloth. Operating instructions...
  • Page 8: Technical Data

    TECHNICAL DATA 1000 1300 Art. no. 427000738-02...