Advertisement
Saucer
Splash cover
Damper adjustment and regulator bar
The burner consists of five parts: Burner vessel, splash cover, a damper adjustment and a damper
regulator bar.
4. The burner vessel is placed in the saucer. The two caution logos is to be in the back.
5. The front plate is pushed down in the front between the burner vessel and the saucer.
Logo facing forward.
6. The splash cover is placed on top of the burner vessel, have the widest end in the front, so
that it easily can slide forward and back to regulate the opening in the damper using the
damper adjustment regulator bar.
The burner is to be placed and mounted in the rectangular hole provided in the fireplace, after the
wood legs, steel stand or the fireplace has been suspended from the ceiling. The damper should face
the opening in the fireplace.
Caution: The three models must be placed a safe distance with of no less than 15 cm away from all
nonflammable materials. Due to the heat emanating from the fireplace it must be placed a minimum
of 1 m from all flammable material.
In addition, is it recommended to place the fireplace in a location of at least 50 cm distance from
electronic equipment, since the heat from the oven have a negative effect.
Mounting the Burner
Burner vessel
Front
19
Advertisement
