Initial Setup - ATOMI Smart Color String Lights User Manual

Step 1:

Initial Setup

1.
1. Carefully unpack Sma String Lights from the box.
2. Before installing, plug the Sma String Lights into
an outlet to ensure all lights work properly.
IMPORTANT: Unplug the Sma String Lights prior to mounting.
5
2.
Step 2:
Installing
A ach to
structure to the
sixth or seventh
holder in middle of
each String light
Installing by Structure
Connect securely to structure at the begining,
middle (the sixth or seventh bulb holder), and
end of each string light.
A ach using hooks
Wire to
or cable ties
Structure
Installing by Guide Wire
A ach ring at the back of every bulb holder to the
guide wire using a S-hook or cable tie (not included).
NOTE: A achment hardware, such as hooks or nylon
cables ties is not included.
A ach to
structure on
first and last
holder
Wire to
Guide Wire
Structure
6