Advertisement
IMPORTANT SAFETY INSTRUCTIONS
DANGER!
• NEVER attempt to operate machine unless you have been trained in its operation.
• NEVER operate in water.
• NEVER expose to rain. ALWAYS store indoors.
• NEVER operate machine with intake or exhaust grills removed.
• NEVER operate machine with a cut, abraded, or taped cord.
• NEVER operate machine with a broken grounding blade on the plug.
• ALWAYS replace entire cord when cord or plug is damaged in any manner.
• NEVER handle machine, cord or plug with wet hands.
• NEVER drop or insert any object into any machine opening.
• ALWAYS keep face, fingers, hair or any body part, or loose clothing away from any machine
opening or moving part.
• NEVER attempt to service or perform maintenance functions while machine is plugged into
electrical outlet.
• NEVER leave machine unattended when pluged in. Unplug machine from electrical outlet when
not in use.
• ALWAYS turn machine off before unplugging from electrical outlet.
• NEVER operate machine in the presence of flammable or combustible liquid or fumes.
When any electrical motor, switch, cord or plug service is required, maintenance should only be done by
an authorized service station, an electrician or other qualified persons.
•
Never operate machine if it is not working properly, if it has been dropped, damaged, exposed to
weather, or dropped in water. Return machine to service center for examination and repair.
•
Never operate machine with any air opening blocked. Keep all air openings free of dust, lint, hair, etc.
•
Always store machine indoors. Protect from rain or snow. Never spray top of machine with liquids.
•
Do not pull or carry machine by electrical supply cord, use cord as a handle, close door on cord, pull
cord around sharp edges or corners, or expose to heated surfaces.
•
Never disconnect plug by pulling on cord. To disconnect from outlet grasp the plug, not the cord.
•
WARNING - To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Fan With Any Solid-
State Speed Control Device.
•
Use Only GFCI Protected Receptaces.
READ AND SAVE THESE INSTRUCTIONS
AERO PLUS
READ AND UNDERSTAND ALL INSTRUCTIONS
BEFORE OPERATING OR SERVICING MACHINE
Failure to Observe These Instructions Can Cause Fire, Electrical
Burn, Shock or Electrocution to Machine Operator or By-standers.
Failure to Observe These Instructions Can Cause Machine or Property
Damage and Possible Injury to Machine Operator and By-standers.
Advertisement
Table of Contents
Related Manuals for NSS AERO PLUS
Summary of Contents for NSS AERO PLUS
-
Page 1: Important Safety Instructions
AERO PLUS IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE OPERATING OR SERVICING MACHINE DANGER! Failure to Observe These Instructions Can Cause Fire, Electrical Burn, Shock or Electrocution to Machine Operator or By-standers. • NEVER attempt to operate machine unless you have been trained in its operation. - Page 2 WARNING: DO NOT ATTEMPT MAINTENANCE OR REPAIRS BEFORE DISCONNECTING CORD FROM ELECTRICAL POWER SOURCE. READ ALL INSTRUCTIONS AND FOLLOW ALL ILLUSTRATIONS CAREFULLY. Follow grounding sequence of assembly as shown to ground machine and ensure safety to operator. GREEN ground wire must be attached to the motor ground and to the Motor Mount Plate to properly ground the entire machine.
- Page 3 10-32 HEX NUT WITH NY-LOK INSERET 9120370 7/32 I.D. X 1/2 O.D. X .032/.065 THICK SAE FLAT WASHER (#10) 4792041 SWITCH, 4 POSITION (OFF, HIGH, MED, LOW) WITH NUT 4792081 DECAL SET, AERO PLUS 0891130 PLASTIC STRAIN RELIEF NUT 3190381 STRAIN RELIEF, NON-FLEXIBLE 9121210...
-
Page 4: Operation Instructions
2. Position fan so that the exhaust snout is under the carpeting pointing toward the center of the room. Be sure the intake screens are not blocked. Secure carpet to Aero Plus with optional carpet clamp. 3. Plug into a grounded outlet and turn switch to desired speed. Fan forces air under and through the carpet to speed drying time.
Need help?
Do you have a question about the AERO PLUS and is the answer not in the manual?
Questions and answers