Limitation Of Liability; Documentation; Documentation Of The Machine - ABB AMA Series Manual

Manual for Induction Motors and Generators

1.3 Limitation of liability

1.4 Documentation

1.4.1 Documentation of the machine

2 - Introduction
In no event shall ABB be liable for direct, indirect, special, incidental or consequential damages
of any nature or kind arising from the use of this document, nor shall ABB be liable for
incidental or consequential damages arising from use of any software or hardware described in
this document.
The warranty issued covers manufacturing and material defects. The warranty does not cover
any damage caused to the machine, personal or third party by improper storage, incorrect
installation or operating of the machine. The warranty conditions are in more detail defined
according to Orgalime S2000 terms and conditions.
NOTE: The warranty issued is not valid, if the operation conditions of the machine are changed
or any changes in the construction of the machine, or repair work to the machine have
been made without prior written approval from the ABB factory, which supplied the
machine.
NOTE: Local ABB sales offices may hold different warranty details, which are specified in the
sales terms, conditions or warranty terms.
For contact information, please see the back page of this User's Manual. Please remember to
provide the serial number of the machine when discussing machine specific issues.
It is recommended that the documentation of the machines is studied carefully before any
actions are taken. This manual and safety instructions are delivered with each machine and is
located in a plastic cover attached on the machine frame.
NOTE: The documentation is delivered to the ordering customer. For additional copies of these
documents, please contact your local ABB office or the After Sales department, see
Chapter 9.1.5 After Sales contact information.
In addition to this manual, each machine is supplied with a Dimension Drawing, an Electrical
Connection Diagram and a Data Sheet indicating the following:
• Mounting and outline dimensions of the machine
• Machine weight and load on the foundation
• Location of lifting eyes of the machine
• Instrumentation and location of accessories
• Bearing oil and lubricant requirements
• Main and auxiliary connections.
NOTE: Some customer specific items may not be included in this User's Manual. Additional
documentation will be found in the project documentation. In case of conflict between
this manual and the additional documentation of the machine, additional
documentation will prevail.
3BFP 000 050 R0101 REV E