Sit & Sigh Original Instructions For Use Manual

Advertisement

LIMITED WARRANTY

Congratulations on the purchase of a Sit & Sigh product.
This Limited Warranty provides you with detailed information on the warranty terms and conditions
along with instructions for the correct use of the purchased item. For this reason, we invite you to
carefully read the following product information and to keep this booklet for future reference. The
preservation of the quality and efficiency of the support requires following a few simple rules of
correct use and care, which you will find in this booklet.
All Sit & Sigh products are covered by a 30-day limited warranty against defects in materials or
workmanship starting from the date of purchase. This Limited Warranty applies, subject to normal
wear and tear, when the products are used as intended following all Sit & Sigh instructions and
requirements. All claims under this Limited Warranty must be accompanied by the original receipt of
purchase indicating date of purchase and/or your order number.
This Limited Warranty is valid only for the original purchaser of the product. An original purchaser is
one who purchases the product directly from Sit & Sigh Ltd. or an authorized retailer of Sit & Sigh. If
purchaser is not the original purchaser of this product, he/she takes it "as is" and "with all faults".
Sit & Sigh's sole obligation under this Limited Warranty shall be to replace the product. The contact
person for processing the warranty claim is the retailer where the product was purchased. The
purchaser should bring the defective support to the retailer, who shall, in its sole discretion,
determine whether to replace the Seating Support and/or its cover. The product may be replaced
with a currently available model, which may differ from the original. Replacement of the product or
any of its components does not extend the duration of the original Limited Warranty. The Limited
Warranty provided for herein does not cover:
-
changes in softness (which takes place over the years), which is natural and does not affect the
characteristics of the product.
-
products in an unsanitary condition, particularly due to bodily fluid stains.
-
damage directly or indirectly caused by people, animals or things, due to the non-compliance
with the instructions of Sit & Sigh on the recommended use and maintenance of the product.
-
personal dissatisfaction with the features and characteristics noticeable at the time of purchase
(e.g. the product is too soft/hard, retains/disperses too much heat, etc.).

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Original and is the answer not in the manual?

Questions and answers

Summary of Contents for Sit & Sigh Original

  • Page 1: Limited Warranty

    Sit & Sigh Ltd. or an authorized retailer of Sit & Sigh. If purchaser is not the original purchaser of this product, he/she takes it “as is” and “with all faults”. Sit & Sigh’s sole obligation under this Limited Warranty shall be to replace the product. The contact person for processing the warranty claim is the retailer where the product was purchased.
  • Page 2 MODELS AND SIZES OF THE SEATING SUPPORTS COVERED BY THIS LIMITED WARRANTY Model: Sit & Sigh ORIGINAL (Soft, Medium. and Firm versions) Model: Sit & Sigh GO Model: Sit & Sigh LUMBAR...
  • Page 3 Please retain this Limited Warranty and your original invoice for one (1) year. INSTRUCTIONS FOR USE ‘Product’ shall refer to ‘Sit & Sigh ORIGINAL’, ‘Sit & Sigh GO’, and ‘Sit & Sigh LUMBAR’. Your new Sit & Sigh product has been produced with the highest quality materials and state of-the- art technologies.
  • Page 4 The sewed protection cover shall not be wet, washed with water or ironed. Do not remove the sewn protection cover. The warranty is void if the cover is broken. - Store horizontally in a dry place between 50°F and 109 °F, with no weight on top. Do not expose the product to sunbeams or external agents such as UV rays, fire, water or steam.
  • Page 5 Side View Top View Illustration 1: Sit & Sigh ORIGINAL (Soft, Medium, and Firm versions) Place cushion on chair as far back as possible with anti-slip base facing down. Sit with tailbone positioned over cutout void at rear with back firmly against chair backrest.
  • Page 6 Side View Front View Rear View Illustration 3: Sit & Sigh LUMBAR Position flat side against a suitable chair back, curved side facing the body, with the convexity matching the spine’s lumbar conformation. Straps should be secured around the sides and over the top of a chair back.

This manual is also suitable for:

GoLumbar

Table of Contents