Advertisement

OWNER'S MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Poseidon and is the answer not in the manual?

Questions and answers

Summary of Contents for Aqua Luxe Poseidon

  • Page 1 OWNER’S MANUAL...
  • Page 2: Quick Reference

    QUICK REFERENCE To assist you with the installation, maintenance, and Electrician potential future service of your new Aqua Luxe brand 1. Name: spa, please fill out the following information and keep Telephone: it on hand for future reference. 2. Name:...
  • Page 3: Table Of Contents

    TABLE OF CONTENTS Quick Reference: Table of Contents: Important Overview: Safety Instructions: Getting to Know Your Spa: Equipment Compartment: Filling Your Spa: Touch Control Panel: Color Control Panel: Jets: Water Care and Chemistry: Spa Maintenance: Installation & Delivery GFCI Setup Wiring Diagram: Troubleshooting Guide: Display and Error Messages:...
  • Page 4: Important Overview

    Triton, Poseidon, Venus, Aurora, Vesta, Terra Manual or any other printed instruction, notice or bulletin from Aqua Luxe. Your spa’s serial number is located both on the base under the equipment door and the Manufacturing ID Label Aqua Luxe reserves the right to change features, located inside the equipment compartment of your spa.
  • Page 5: Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Save these instructions WARNING: To Reduce the Risk of Injury: Water temperature in a spa should never exceed 104˚F Safety Instructions (40 ˚ C). Water temperatures between 100˚ F (38˚C) and 104˚F (40˚C) are considered safe for a healthy adult. Water temperature in excess of 104˚...
  • Page 6 Non-Approved Accessories. Using accessories not approved by Bullfrog International, LC could void your warranty or cause other problems. Please consult your authorized Aqua Luxe dealer. CAUTION: Spa Location. Locate your spa on a foundation that can support the maximum filled weight of your spa along with the weight of all the occupants using the spa (see Site Selection and Preparation).
  • Page 7 Warning Signs (North America) REDUCE THE RISK OF ELECTROCUTION 1. NEVER PLACE AN ELECTRIC APPLIANCE WITHIN 5 FEET OF SPA REDUCE THE RISK OF CHILD DROWNING Included with the spa is a warning sign to inform users 1. SUPERVISE CHILDREN AT ALL TIMES. 2.
  • Page 8: Getting To Know Your Spa

    GETTING TO KNOW YOUR SPA Spa Overview [Triton Pictured]...
  • Page 9: Equipment Compartment

    EQUIPMENT COMPARTMENT...
  • Page 10: Filling Your Spa

    IMPORTANT: Your Aqua Luxe spa is equipped with one authorized Aqua Luxe Dealer). If your water is extremely hard, it of 2 types of control pads. Locate the control system on your spa is preferable to either dilute the water’s hardness by blending the...
  • Page 11: Touch Control Panel

    Please consult your spa user manual for complete info on the features of your spa system. touch screen keypad in.k1000 No buttons, keys and overlays! Mode and function selection wheels, all-on or all-off one touch activation key of last in.k 1000 TOUCH CONTROL used settings, interactive display icons and on-screen messages are all elements of the in.k1000 user interface designed to let spa users interact intuitively with their spa and its value-added accessories.
  • Page 12 in.stream 2 audio in.stream 2 audio in.mix system is on system is off is installed spas functions Quick and easy step-by-step instructions to control the main functions and to configure system settings of your spa from its in.k1000 main spa keypad. turn keypad on all-on, all-off target key From the home page, you can access the...
  • Page 13 spa mode spa mode start or stop accessories water temperature To select the spa mode, slide the left wheel up To start or stop an accessory (pump, blower, The temperature at the bottom of the screen or down until the spa icon is highlighted in the light), touch the associated icon.
  • Page 14 settings You can use the Settings mode to manage settings of your spa system. direct to function selection wheel: water care - maintenance - date & time - keypad - electrical config - wifi - mode selection wheel: about - settings icon list of featured items To select the settings mode, slide the left wheel up or down until the settings icon menu is highlighted in...
  • Page 15 water care The Water care page will help you set up your ideal filtration and heating settings.The Water care page will help you set up your ideal filtration and heating settings. Choose, set or modify one of the 5 suggested modes depending on your needs at any given time. Away from home Beginner Energy Savings...
  • Page 16 purges You can modify the programmed purges by selecting one and adjusting the schedule. Touch the Purge tab to change the purge settings. You can add purges by touching the You have several possibilities for the schedule orange line labelled "Add purge time". (Mon-Fri, weekend, every day, or single days).
  • Page 17 keypad settings keypad settings temperature units display orientation To modify keypad settings, slide the right wheel Use this page to set or change the temperature in Use this page to set or change the normal or until the keypad icon is highlighted in the middle. F˚...
  • Page 18 wifi settings wifi networks wifi network password To modify wifi network settings, slide the right After a few seconds the available networks will If the wifi network is pas miscellaneous wheel until the wifi icon is highlighted in the appear on-screen, as well as their signal strength. it when keyboard promp middle.
  • Page 19 audio mode (only available if the system detects a connected in.stream 2 audio station) direct to function selection wheel: on/off - speakers - source - bluetooth - mode selection wheel: audio mode mute / last track / play/pause / next track To select the audio mode, slide the left wheel up or down until the audio icon menu is highlighted in the middle.
  • Page 20 speakers setting audio source selector disconnect bluetooth to modify your speaker settings to select an audio source If a device with Bluetooth technology is connected to the in.stream 2, you can disconnect it by Slide the right wheel until the source icon is Slide the right wheel until the speaker calibration pressing the Disconnect key at the bottom of the icon is highlighted in the middle.
  • Page 21: Color Control Panel

    in.k 800 COLOR CONTROL Quick Reference Card Please consult your spa user manual for complete info on the features of your spa system. in.k800 intuitive color keypad With its bright, full color display, the in.k800 provides an intuitive user experience, while its screen’s high resolution brings hot tub user interfaces to a new level.
  • Page 22 Settings Water care modes Away from home: In this mode the spa will always be in economy; the set point will be reduced by 20° F. Standard - Beginner: The spa will never be in economy mode and will be filtering according to the pack's low level configuration.
  • Page 23 Settings Standby Date and time Keypad settings In this section, you can change the temperature The Standby mode allows you to service your spa. Here you can adjust the time format, change the Pumps will stop for 30 minutes, and automatically year, date, and time.
  • Page 24 Audio Audio in.tune functions in.stream functions The in.k800 can be used with the in.tune, This menu is only available if the in.tune This menu is only available if the in.stream in.stream or in.stream 2 audio system. option was selected during production. option was selected during production.
  • Page 25: Jets

    JETS Adjusting Jets To adjust the water flow on adjustable jets, simply turn the outer ring. • To increase jet water pressure, turn the outer ring clockwise. • To decrease jet water pressure, turn the outer ring counter clockwise. NOTE: Turning off jets will increase pressure to other jets on same pump.
  • Page 26: Water Care And Chemistry

    ½ teaspoons of granular chlorine or 1 related questions and concerns to your local Authorized Aqua teaspoon of granular bromine per each 200 gallons (909.2l) of spa Luxe Dealer. Your Authorized Aqua Luxe dealer can recommend water. the correct products and procedures for safely sanitizing and...
  • Page 27 To correct low TA, add a Total Alkalinity Increaser. High TA can cause the water to be scale forming, cloudy and Your Aqua Luxe spa may be equipped with an optional ozone corrosive to the spa and its components, as well as other pH purification system.
  • Page 28: Spa Maintenance

    SPA MAINTENANCE WARNING: Step 4: An empty spa (spa without water in it) must not Remove drain cap. be left exposed to sunlight as shell damage may occur. Once the NOTE: The drain spout will not drain when fully extended. spa is unwrapped, fill spa with water immediately or shade the spa Step 5: Attach a standard garden hose.
  • Page 29 1:10 ratio of muriatic acid to water replaced. To maintain warranty protection, use only genuine solution. Calcium deposits indicate a high spa pH, which Aqua Luxe filter cartridge replacements. To clean or replace your should be corrected. filter cartridge(s), complete the following: CAUTION: Never operate spa with the filter(s) removed.
  • Page 30 Miscellaneous Spa Care an authorized Aqua Luxe dealer. For stubborn stains, use a mild acrylic cleaner or a mild detergent. To apply these cleaners, use a soft, damp cloth or sponge. Rinse well and dry with a clean cloth.
  • Page 31 No Use for Over Six Weeks Step 5: Clean the spa shell. When you are not planning to use the spa for six or more weeks, Step 6: Remove filter cartridge(s), clean, and reinstall. or when someone is not able to maintain the spa on a weekly Step 7: basis, you should use Away mode.
  • Page 32 IMPORTANT: Aqua Luxe spas are designed so that there door out of the first snap. Grab the base of the door and carefully are no visible fasteners from the exterior. Snap features in the...
  • Page 33: Installation & Delivery

    A licensed Electrician must perform the electrical installation and GFCI test procedure. Each Aqua Luxe is manufactured and In addition to handling the water from the spa, it is tested to a standard that provides maximum protection against recommended that the room be properly ventilated.
  • Page 34 18 inches (.61m) of clearance are located within the maximum specified distances. The bonding behind the spa. Check with your authorized Aqua Luxe Dealer is to be connected to the ground lug connector on the exterior...
  • Page 35 When leveling your spa, there should be no but will add life and much enjoyment to the environment. If voids beneath it. Contact your authorized Aqua Luxe Dealer the budget allows, you may want to consult with a Landscape before making any leveling adjustments.
  • Page 36 Always have a licensed equipment, handrails, fixtures, enclosures, pipe, or conduit that Electrician perform the electrical installation. Each Aqua Luxe are located within the maximum specified distances. The bonding is manufactured and tested to a standard that provides maximum is to be connected to the ground lug connector on the exterior protection against electrical shock.
  • Page 37 For safety purposes, the location of the power outlet (where repaired by a licensed Electrician or your authorized Aqua Luxe the spa is to be connected) can be no closer than the minimum dealer.
  • Page 38 To conform with electrical codes, and to create a barrier conduit drill 1-3/8” hole). Use the + as the locater for the center against pests, any holes created in the base of your Aqua Luxe of the hole. The hole saw must go through two layers of plastic.
  • Page 39: Gfci Setup

    Electrical wiring GFCI WIRING Electrical wiring: North Amercian model in.ye and in.yt Refer to wiring diagram in the enclosure box lid for more information� 240 V (4 wires) 120 V (*3 wires) * If connected to a 3 wires Note: To convert model to a 120 V system, the white (common) accessory wire must be moved�...
  • Page 40: Wiring Diagram

    Connections - 0611-221038-567 HARDWARE SETUP/WIRING DIAGRAM Connecting high voltage accessories: North American model in.yt For the connection to the 0.250 inch terminals, the high voltage accessories must be provided with female quick connect terminals, straight and non-insulated for all types of connections, including the ground. Accessories of 120 V or 240 V may be connected to the corresponding terminals of the printed circuit of the in.yt.
  • Page 41: Troubleshooting Guide

    Solution: Turn on or reset the GFCI circuit breaker. If this does outside temperatures, excessive run time. not solve the problem, have a qualified Electrician check the Solution: Contact your authorized Aqua Luxe dealer or service electrical service. center. Cause #2: The 20 or 30A fuse, depending on the system, has Jets are weaker than normal or do not work at all, but blown.
  • Page 42: Display And Error Messages

    Refer to the troubleshooting and error codes section of the TechBook for your spa pack system� Please note that if you are in a swim spa configuration, the message may be followed by "Master" or "Slave" to designate DISPLAY MESSAGES & ERROR MESSAGES from which pack the error is coming�...
  • Page 44 Warranty Center 668 W. 14600 S. Bluffdale, UT 84065 T: (888) 385-0172 v 1.5 North America 2019 Bullfrog International LC...

This manual is also suitable for:

AuroraTritonVenusTerraVesta

Table of Contents

Save PDF