Important Instructions
Retain for future use
STORING YOUR THROW
Always allow the Electric Throw to cool before folding and storing. Remove the control and roll or fold
the Electric Throw loosely and store it in a bag or the bag it was supplied in. Avoid pressing sharp
creases into the Electric Throw; for example do not store it under other items that may result in
bending the wires of the Electric Throw.
CARE & CLEANING OF YOUR ELECTRIC BLANKET
Taking care of your Electric Blanket is easy and safe as long as you follow the steps outlined below:
DO NOT dry clean your Electric Throw. Dry cleaning will damage the wiring.
DO NOT use bleach or dry cleaning fluids.
DO NOT use a wringer.
DO NOT iron the Electric Throw.
DO NOT turn on the Electric Throw until it is completely dry.
DO NOT use mothballs or sprays of any kind.
SPOT CLEANING
Unplug and remove the control from the Electric Throw.
Wet sponge the affected area using a mild soap and lukewarm water solution. Ensure the water
temperature is less than 30°C.
Gently sponge the affected area with clean water.
Use a neutral coloured towel to absorb excess water.
HAND WASHING
Unplug and remove the Electric Throw control.
Fold and pre-soak the Electric Throw for 15 minutes in a mild soap and lukewarm water solution.
Ensure the water temperature is less than 30°C.
Gently squeeze the soap suds through for a few minutes.
Rinse in fresh lukewarm water.
MACHINE WASHING
Unplug and remove the Electric Throw control.
Fold and presoak the Electric Throw for 15 minutes in a mild soap and lukewarm water solution.
Ensure the water temperature is less than 30°C.
Wash in mild soap and lukewarm water on the delicate or gentle cycle for 2 minutes.
Rinse in fresh lukewarm water.
AIR DRYING
Gently stretch the Electric Throw to its original size.
Air dry over a clothes line or shower rod. (DO NOT use clothes pegs or clips of any kind).
DO NOT use the Electric Throw until it is completely dry.
Need help?
Do you have a question about the CELMFT200 and is the answer not in the manual?