Download Print this page

Nursecall Shop i2 Series Installation & User Manual

Call point

Advertisement

Quick Links

Call Point Installation & User Guide
i
2
Features
The i
Wireless Nursecall system has been specifically
2
designed for quick and easy installation by anyone.
One call point and one pager is all it takes to create
an i
wireless nursecall system. The equipment is
2
ready to install and your nursecall system can be
operational in a matter of minutes.
Its simplicity does not however compromise the
functionality or the flexibility of the system. The
wireless system can be extended to comprise of
displays, call logging, door alarm monitors, pear
push leads and other accessories.
A unique feature to this Nursecall is that each
Call Point is intelligent and sends a call directly
to Displays and Pagers. By employing distributed
intelligence there is no need for a Central Control
Unit. It provides staff with essential information,
alerting them to every resident or staff call with its
location and urgency.
For example, "R:005 CALL 01Mins" or "R:011 SENSOR
03Mins".
Powered by KAM Systems Limited
Powered by KAM Systems Limited
User Guide
User Guide
Once activated the Call Point will repeat the call
until it is cancelled. This means that a nurse call
alarm cannot be ignored and has to be reset in the
room it has been activated. If a Call Point is active
for six minutes it will automatically escalate to
an Assist alarm. The Call Point will also send the
amount of minutes it has been active as part of the
alarm message.
The Visit function when used in conjunction
with the Call Logger, will help conform to CQC
guidelines in response times and night checks.
There are two Call Point variants, the CPWPC with
the addition of a Pull Cord and the CPWPP which
has two auxiliary inputs for a Pear Push and other
devices such as Floor Sensor Mats, Bed and Chair
sensors, Epileptic Monitors, Motion sensors or
any other sensor that has a stereo or Mono jack
plug. Adaptors are available to connect existing
accessories.
The call points are powered by a small self-
contained AA/AAA battery pack. Available to buy
from Nursecall Shop.
www.nursecallshop.co.uk
www.nursecallshop.co.uk
Series
Series
i
2
2
i

Advertisement

loading
Need help?

Need help?

Do you have a question about the i2 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Nursecall Shop i2 Series

  • Page 1 For example, “R:005 CALL 01Mins” or “R:011 SENSOR The call points are powered by a small self- 03Mins”. contained AA/AAA battery pack. Available to buy from Nursecall Shop. www.nursecallshop.co.uk Powered by KAM Systems Limited www.nursecallshop.co.uk Powered by KAM Systems Limited...
  • Page 2 call point installation and user guide User Guide User Guide Series Series Installation Fitting and removing the battery Care should be taken when removing and fitting To screw the call point to the wall, you first have the battery pack. When removing the battery pull to remove the front face plate by unscrewing the the plug from the socket.
  • Page 3: Emergency Calls

    Double Aux Call Point Operation User Guide Series User Guide Series Standard Calls Once the call point is activated a paging message is sent to the pagers and displays. To trigger a standard call, the user presses the orange button on a call point or operates the Sensors - example Floor Sensor Mats remote button of a pear push lead.
  • Page 4: Technical Specifications

    User Guide Series Pull Cord Call Point Operation User Guide Series Pull Cord Assistance Calls If assistance is required by a member of staff (but it Standard Calls is not an emergency), pressing the orange button on To trigger a standard call, the user presses the the call point whilst it is in Standard Call will initiate orange button on a call point or pulls the orange an Assistance Call.