Telefunken TF-PS2202S Instruction Manual page 4

Utilization of the product
If you want to dispose this product, do not
mix it with general household waste. There is a
separate collection system for used electronic
products in accordance with legislation that
requires proper treatment, recovery and
recycling.
Please contact your local authorities for
the correct method of disposal. By doing so,
you will ensure that your disposed product
undergoes the necessary treatment, recovery
and recycling and thus prevent potential
negative effects on the environment and
human health.
Important safeguards
• The instruction manual contains important
operating and maintenance instructions. For
your safety, it is necessary to refer the manual.
Keep the manual for use in future.
• Do not hit or drop the unit.
• Do not expose the unit to vibration, direct
sunlight, too high or low temperature or humidity.
• Do not disassemble the unit yourself.
Refer servicing to qualified service personnel.
Power supply
• The unit operates on an alternating
current network or an internal rechargeable
lead-acid battery.
• The battery can be recharged with
the provided AC power cord. Before first
plugging the appliance check that voltage
indicated on the rating label corresponds to
the mains voltage in your home.
• Insert the power cord into the
AC power input socket at the back of the unit.
• Plug the power cord into the wall outlet.
• The charging LED indicator will light in
red.
• When the battery is fully charged
(around 5 hours when the unit is off), the
LED indicator will turn to green. When
the charge is low the red LED will flash.
• For best results, try to fully charge the
battery before each use. If the battery is
drained, please allow it to recharge for a few
hours.
Instruction manual
General operations
Power on/off
Press the POWER button to switch the unit
on. Press this button again to switch the unit
off.
Modes of operation
Press the FUNCTION button repeatedly to
select an operation mode: USB =>
BLUETOOTH => AUX => RADIO.
Volume control
Rotate the volume knob to adjust the general
volume level of the unit.
You can also separately adjust the volume of
microphone (if connected) by rotating the
microphone volume knob.
Bass adjustment
Press the SUPER BASS button to increase
and decrease the bass effect.
Equalizer
Press the EQ button on unit to select a
setting that best matches the music style:
FLAT, CLASSIC, ROCK, POP and JAZZ.
LED lighting
There are 9 modes for the disco LED
lighting. Press the LIGHT button to choose the
desired lighting mode. Modes L1-L7 are 7
kinds of individual color lights, mode L8 is a
multicolor flashing light, mode L9 is a
multicolor pulsing light.
To turn off the light effect, press the LIGHT
button until OFF shows on the display.
4