Front Panel Description; Rear Panel Description - AKG CA810 Manual

3. Front Panel Description

OUTPUT LEVEL
CH 1 CH 2 CH 3
POWER SWITCH
- Turns AC power on and off.
POWER LED
- Indicates the presence of AC power to the CA810.
CHANNEL LEVEL 1-8

4. Rear Panel Description

SPEAKER OUT LINE IN
8 7 6 5 CH 8 CH 7 CH 6
+ – + – + – + – + – + – + –
LINE INPUTS 1-8
- Accepts balanced or unbalanced signal. Fully balanced differential input,
RF filtered.
SPEAKER OUTPUTS 1-8
loads bridged.
AC POWER RECEPTACLE
AC POWER FUSE
- Accepts a 3A, 250V (1.5A, 250V when wired for 230VAC operation)
Slo-Blo fuse.
CH 4
Figure 6 - CEQ1/1 and CEQ1/1BB Front Panel
- Controls the volume level of each channel.
CAUTION
TO REDUCE THE RISK OF
CH 5
+ – FIRE, REPLACE ONLY
WITH SAME TYPE 1.5A,
250V "SLO-BLO" FUSE
230V AC
WARNING
300 WATTS TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
Figure 4 - CEQ1/1 and CEQ1/1BB Rear Panel
- Drive minimum 4 Ohm loads non-bridged, and minimum 8 Ohm
- Accepts standard detachable 120VAC power cord.
CA 810
POWER AMPLIFIER
POWER
CA 810
POWER AMPLIFIER
13
CA810
OUTPUT LEVEL
CH 5 CH 6 CH 7 CH 8
MADE BY LECTROSONICS USA
LINE IN SPEAKER OUT
CH 4 CH 3 CH 2 CH 1 4 3 2 1
+ – + – + – + – + – + – + – + –