Table of Contents
Advertisement
Quick Links
600 v
Applications
• Designed to supply power to portable or fixed
electrical equipment such as motor generator
units, welders, pumps, compressors and similar
apparatus.
• Ideal for use on shipping docks, ports, and
other "ship to shore" applications.
• Suitable for use in locations where a NEMA 4X
enclosure is required.
• Rough usage construction
• Available in two grounding styles:
Style 1 (3W, 3P and 4W, 4P) shell grounding only.
Style 2 (2W, 3P and 3W, 4P) Shell and extra pole
grounding.
Compliances
• UL Standards 1682.
• CSA Specifications C22.2 No 42.
* Plug is NEMA 4X when clamp is fully tightened.
Applications
• Designed to supply power to portable or
fixed electrical equipment such as motor
generators units, welders, pumps, compressors
and similar apparatus.
• Ideal for use on shipping docks, ports,
and other "ship to shore" applications.
• Suitable for use in locations where a
weatherproof enclosure is required.
• Rough usage construction
• Available in two grounding styles:
Style 1 (3W, 3P and 4W, 4P) shell grounding only.
Style 2 (2W, 3P and 3W, 4P) Shell and extra pole
grounding.
Compliances
• UL Standards 1682.
• CSA Specifications C22.2 No 42.
Note: When ordering Reverse Service add - RS after catalog number.
EGS Electrical Group • www.appletonelec.com • 800-621-1506
P
owertite ®
200 A
c
c
Able
onnectorS And
Ac, 250 v
dc. w
r
olt
olt
ire
eceSS
P
owertite ®
r
S
, P
everSe
ervice
Instruction Sheet for Powertite
Plug, Connector and Receptacle
P
& S
r
mP
in
leeve
ecePtAcleS
P
: nemA 4X.
lugS
d
: .687". w
S
: 250mcm - 4/0
iAmeter
ire
ize rAnge
AJA Mounting Box
with Spring Cover
Receptacle
Plug Only*
t
d
:
echnicAl
AtA
, P
S
olArizAtion
in And
leeve
Style 1 (Only)
Ground Wire
Assembly
Bushing
Crown
Rear Terminal
Housing Cap
Block
Ground Male
Terminal Assembly
Split Type
Contacts
,
3/0 - #4.
And
AJA Mounting Box
with Clamp Door
Connector
Body Only*
Complete
Connector*
d
.
eSign
Ground
Screw
Front Terminal
Block
Ground Bar
Male Terminal
Plug Retaining
Ring
Retaining
Plug Housing
Ring
(Style 1)
Rev. F 09/18/09
330087 Rev. G 10/16
330087
®
Receptacle
Page 1
Advertisement
Table of Contents
Related Manuals for EGS Appleton Powertite 200 Series
Summary of Contents for EGS Appleton Powertite 200 Series
- Page 1 • UL Standards 1682. Split Type • CSA Specifications C22.2 No 42. Contacts Note: When ordering Reverse Service add - RS after catalog number. Rev. F 09/18/09 330087 Rev. G 10/16 EGS Electrical Group • www.appletonelec.com • 800-621-1506 Page 1...
- Page 2 (4) until grommet (6) is tightened 3-Phase 3W, 3P; 3W, 4P or 4W, 4P around the cable and tighten the setscrew (2). Tighten the clamps (5) screw securely. 330087 Rev. G 10/16 Page 2 EGS Electrical Group • www.appletonelec.com • 800-621-1506...
- Page 3 7. Place the grommet (6) and steel ring (7) on the back of housing cap (9), tighten the clamp cap (4) until the grommet (6) is tightened around the cable and tighten the setscrew (2) and cable clamps (5) securely. 330087 Rev. G 10/16 EGS Electrical Group • www.appletonelec.com • 800-621-1506 Page 3...
- Page 4 13.00 4.56 5.75 Standard Service Reverse Service Plug No. Poles Style 2 11.94 7.81 3.81 3.75 6.44 Shell and Extra Pole Grounding 11.94 7.81 4.19 4.13 6.81 330087 Rev. G 10/16 Page 4 EGS Electrical Group • www.appletonelec.com • 800-621-1506...
- Page 5 4. Tighten set screw securely (50-60 in-Ibs). 1. Copper Plate 3. Terminal igure igure 4. Hex Set Screw 2. Stripped Wire * Caution: Check National Electrical Code for proper wire size and application. 330087 Rev. G 10/16 EGS Electrical Group • www.appletonelec.com • 800-621-1506 Page 5...
- Page 6 Slide the locking bar in place until it is flush with both ends of the locking bracket as shown in Figure 3. Install padlock(s) in one or more of the five 11/32” (8.9mm) padlock holes provided. Figure 3 330087 Rev. G 10/16 Page 6 EGS Electrical Group • www.appletonelec.com • 800-621-1506...
- Page 7 1. Prepare wire by stripping 3/4” from the end of the wire (wire size range: #2-4/0). 2. Loosen the set screw enough to fit the wire in the lug. 3. Tighten set screw securely (50-60 in-lbs). 330087 Rev. G 10/16 EGS Electrical Group • www.appletonelec.com • 800-621-1506 Page 7...
- Page 8 330087 Rev. G 10/16 Page 8 EGS Electrical Group • www.appletonelec.com • 800-621-1506...
Need help?
Do you have a question about the Appleton Powertite 200 Series and is the answer not in the manual?
Questions and answers