Chapter 2
In this chapter:
•
Power Supply,
•
System Configuration,
2.1
General Information
The installation section describes how to:
•
Unpack the unit
•
Ensure an optimum site location
•
Install the power supply and dry contact connection
2.2
Unpacking
Before unpacking any equipment:
•
Inspect all shipping containers for evidence of external damage caused during
transportation
•
Inspect for damage after it is removed from the containers
IMPORTANT
2.3
Equipment Location
The TC8927 should be located in an area that provides adequate light, work space
and ventilation.
Important
TC8927 Rev 1.0
on page 2-2
on page 2-2
Any claims concerning shipping damage should be made directly to
the pertinent shipping agencies. Any discrepancies should be
reported immediately to the Customer Service Department at TC
Communications, Inc. at (949) 852-1973.
Avoid locating it next to any equipment that may produce electrical
interference or strong magnetic fields, such as elevator shafts or
heavy duty power supplies.
As with any electronic equipment, keep the unit from excessive
moisture, heat, vibration and freezing temperatures.
User Manual
Installation
2-1