Ways To Move; Control Panel - Johnson Health Care Co NestPlus FM212 Manual

Synca
Table of Contents

Advertisement

WAYS TO MOVE

Step 1:
Hold both sides of
NESTplus (on both sides)
with both hands.
Step 2:
Slightly press the back
of the upper side of the
machine to raise the front
pedestal for about 40
degrees.
Step 3:
After the moving rollers at the
rear area of the pedestal touch
the ground, you may drag to
move NESTplus to a proper
location, and then gently lower
the front pedestal to re-touch
the ground.
16

CONTROL PANEL

Power button:
When the power is off, press the
power button to activate the
machine. When pressing the button
again, the massage will stop and
enter the stand-by status.
Emergency stop button:
All operation will stop immediately.
17

Advertisement

Table of Contents
loading

Table of Contents