Summary of Contents for Test Equipment Depot EDSYN LONER 952SX
- Page 1 952SX LONER ® Temperature Controlled Soldering Station • COMPLIES WITH MIL-S-45743E, MIL-STD-2000, DOD-STD-2000-1B, WS6536E AND ESD SPEC, DOD-STD-1686, DOD-HDBK-263 made U S A instruction manual...
- Page 2 Specifications for Model 952SX Power Requirements 120V, 50/60 Hz Power Rating 15W - 220W Heater Rating 120V, 95W Temperature Range 400°F-800°F/205°C-427°C Temperature Regulation ±6°F/±3°C Tip-to-Ground Voltage Leakage/Resistance < 2mV/< 2 ohms Overall Dimension 4.1"W x 8.2"H x 10"D 104 mm x 208 mm x 254 mm Weight 3.1 lbs/1.4 kg Contents...
- Page 3 PD528 Static Safe Tool Temp. Regulation Indicator Power Switch SH230 Sponge Holder Calibration Pots for HI & LO Temp. Hollow Threadless Heater WARNING: MAINTENANCE • Replace SC581 Solder Collector • Replace RS199 Cleaning Sponge Fill water only up to the top of the RS243 Hold the Housing firm and turn Cap Leveling Pad.
- Page 4 t o ma t c h t e mp e r a t u r e ma r k i n g s o n t h e f r o n t p a n e l . ) ME T E R...
- Page 5 CHANGING TIP DO NOT USE the soldering tool if soldering tip is loose. This will cause the heater element to break. MAKE SURE YOUR TOOL IS COOL! Turn Retaining Sleeve counter-clockwise to remove. Remove old Soldering Tip. Insert new Tip. 5.
- Page 6 952SX LONER SOLDERING STATION ® SPARE PARTS LIST...
- Page 7 ITEM DESCRIPTION PART NO. REQ'D PD528 Tool Pod SR042 Thermal Housing for Tool Pod SC581 Solder Collector for Tool Pod SR043 Front Housing for Tool Pod SH230 General Purpose Sponge Holder RS199 Cleaning Sponge RS243 Leveling Pad for SH230 LN230 Liner for SH230 SH230-1 Sponge Holder Tray...
- Page 8 952SX instruction manual ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION INCLUDING THE INDIVIDUAL ICONS MAY BE REPRODUCED OR UTILIZED IN ANY FORM OR BY ANY MEANS WITHOUT THE PERMISSION OF EDSYN, INC. THE NAMES LONER, SOLDAPULLT, SOLDAVAC, ATMOSCOPE, AUTO-VAC, IDLE-REST, OCTAVAC AND KLATCH ARE REGISTERED TRADEMARKS OF EDSYN, INC.
Need help?
Do you have a question about the EDSYN LONER 952SX and is the answer not in the manual?
Questions and answers