Table of Contents
Advertisement
Display messages
ER01 – PAD, ER08 – Flash error, ER10 – Comms error
Resolution:
a. Remove the pillow pad from the cradle.
b. Remove all 4 batteries from the unit.
c. After 20 seconds re-insert the batteries.
d. Perform a self test by pressing MUTE/SNOOZE.
ER02 – Motor jam
Resolution: Remove the pillow pad from the cradle and hold down MUTE/SNOOZE
until 'TEST' is shown in the screen. During the test:
a. 'TEST' should be shown on the screen.
b. Both strobes should be flashing.
c. There should be a continuous bleep.
d. The status light should flash GREEN once every 15 seconds.
e. The pillow pad should vibrate.
After 10 seconds, the test should stop and:
a. The screen should show the time.
b. Both strobes should stop.
c. The bleeping should stop.
d. The status light should flash GREEN once every 15 seconds.
Page 12
Advertisement
Table of Contents
