Download Print this page

Halsted Rain Frogmouth Filter Installation Instructions

Advertisement

Quick Links

Page 1
Important Information:
These instructions and dimensions are provided for guidance only. They may require
adapting to individual site requirements and the design of the tank system.
When the filter is installed to provide the tank overflow, the rainwater divert and overflow
pipe must be horizontal and level.
If the downpipe is over 4 m to Frogmouth entry, install an elbow entry to reduce the velocity
of rainwater flowing from the roof line.
It is recommended that the push fit adaptors are secured with PVC cement/glue or a screw
fixing. The adaptors can be painted to match the colour of the downpipe. They should be
washed in soapy water and prepared with a primer coat before painting.
460mm
68mm reducer
68mm reducer
mm
440mm
460mm
440mm
440mm
460mm
440mm
300mm
440mm
300mm
adaptor

Advertisement

loading

Summary of Contents for Halsted Rain Frogmouth Filter

  • Page 1 Page 1 Important Information:  These instructions and dimensions are provided for guidance only. They may require adapting to individual site requirements and the design of the tank system.  When the filter is installed to provide the tank overflow, the rainwater divert and overflow pipe must be horizontal and level.
  • Page 2 Page 2 460mm plus length of round 460mm to rectangular adaptor required Filters are supplied with a push fit reducer to interconnect with a 68mm downpipe. Unfasten the support brackets on the lower section of pipe. Lower the pipe to fit the filter and reducer, raise the pipe again and secure with a standard wall mounted downpipe bracket.
  • Page 3 Page 3 Apply PVC cement to the flange of the Frogmouth Attach 68mm reducer onto the flange Attach 68mm pipe to tank For further information contact Halsted Rain Ltd Halsted House Lock Chase Blackheath London SE3 9HB Direct Line: 07900 427450 Switchboard: 0208 318 0957 www.halstedrain.com...
  • Page 4 Halsted Rain Rainwater Filter Adaptor for 68mm Downpipe 1 x Concentric Reducer 90 x 78 Frogmouth Inlet 2 x Concentric Reducer 90 x 68 Frogmouth Outlets 1 x Coupler 90 mm Frogmouth to Lazy Lizard Interconnect (Only supplied with Lazy Lizard Filter)