Connecting Lady-Comp; Charge The Battery; Recharge The Battery - Valley Electronics LADY-COMP Instructions Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connecting LADY-COMP

Connect the LADY-COMP
plug
1. Connect the power cord into socket A on
the back of the device (don't plug it into
your AC wall outlet yet)
2. Connect the thermal sensor into socket B on
the back of the device
Important:
3. THEN last step:
plug it into your AC wall outlet
Connecting LADY-COMP
®
® with the power
A B
®

Charge the Battery

• When you receive the device, the battery is
not charged.
• Charge the battery for 24 hours the first
time. During charging, the charge condition
indicator Lo 01 to Lo 10 will light up.
• Your device is now ready for approx. one
month*
• Temperature readings cannot be taken
during charging.

Recharge the Battery

*When the display BA 09 to BA 01 is shown,
the battery must be recharged again.
The battery is completely charged after
approx. 12 hours.
11