106 Seats and stowing
To move backwards: press release knob
#
and push the head restraint backwards.
Adjusting the head restraints of the rear
seats mechanically
To raise: pull the head restraint up.
#
To lower: press release knob
#
tion of the arrow and push the head restraint
down.
1
Fitting/removing the rear seat head
restraints
Removal
The head restraints can be removed only in vehi‐
cles with folding rear seat backrests.
Release the rear seat backrest and fold it
#
1
in the direc‐
slightly forwards (
Nur für internen Gebrauch / For internal use only
#
#
Fitting
#
#
#
Configuring the seat settings
Multimedia system:
#
Adjusting the backrest side bolsters
#
page 116).
→
#
Pull the head restraint upwards as far as it
will go.
Push release knob
1
in the direction of the
arrow and pull out the head restraint.
Insert the head restraint such that the
notches on the bar are on the left when
viewed in the direction of travel.
Push the head restraint down until you hear
it engage in position.
Fold the rear seat backrest back until it
engages.
Vehicle
a Seats
,
.
Select
Driver's seat
or
Passenger
Select
Side
bolsters.
Select the setting.
seat.