Table of Contents
Advertisement
Quick Links
RATCHETING CAR DOLLY – 2 PIECE
Model 47990
ASSEMBLY AND OPERATING INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
®
Copyright
2002 by Harbor Freight Tools
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions please call 1-800-444-3353.
Advertisement
Table of Contents
Related Manuals for Central Machinery 47990
Summary of Contents for Central Machinery 47990
- Page 1 RATCHETING CAR DOLLY – 2 PIECE Model 47990 ASSEMBLY AND OPERATING INSTRUCTIONS ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com ® Copyright 2002 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
-
Page 2: Product Specifications
GENERAL SAFETY WARNINGS AND PRECAUTIONS KEEP WORK AREA CLEAN AND DRY. Cluttered, damp, or wet work areas invite injuries. KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle this product. SKU 47990 PAGE 2... - Page 3 Approved accessories are available from Harbor Freight Tools. MAINTAIN THIS PRODUCT WITH CARE. Keep this product clean and dry for better and safer performance. SERVICE AND MAINTENANCE: For your safety, service and maintenance should be performed regularly by a qualified technician. SKU 47990 PAGE 3...
-
Page 4: Specific Product Warnings And Precautions
Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris. THE CAR DOLLIES MUST BE USED IN PAIRS AT EITHER THE FRONT OR REAR OF THE VEHICLE. THE CAR DOLLIES SHOULD NEVER BE USED DIAGONALLY. SKU 47990 PAGE 4... - Page 5 When unpacking, check to make sure all the parts shown on the Parts List (page 9) are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. SKU 47990 PAGE 5...
- Page 6 Pump down of Foot Plate Assy. (#4) to begin raising the tire. Make sure to allow the Foot Plate Assy. to return to full up position before pumping down on it again. Continue pumping Foot Plate Assy. until tire is approximately 1 inch off the floor surface. (See Figure B) SKU 47990 PAGE 6...
- Page 7 Continue to operate the Foot Plate Assembly until the tire is completely resting on the floor surface and no longer exerting pressure on the Rollers (part #19). (See Figure C, next page.) SKU 47990 PAGE 7...
-
Page 8: Inspection, Maintenance, And Cleaning
PERIODICALLY, use a premium quality, lightweight grease to lubricate all mov- ing parts. When necessary, wipe with a damp cloth, using a mild detergent or mild solvent. When storing, keep the Car Dollies clean and dry. SKU 47990 PAGE 8... -
Page 9: Parts List
Pivot Pin Lock Nut (M10) Lock Nut (M6) Bolt (M12 x 35) Spring Sleeve Bolt (M6 x 10) Connector Plate Washer (M6) Wheel Assembly Lock Knob Locking Frame Spring Clip Washer (M12) Sleeve Lock Nut (M12) Spring SKU 47990 PAGE 9... -
Page 10: Assembly Diagram
ASSEMBLY DIAGRAM SKU 47990 PAGE 10...
Need help?
Do you have a question about the 47990 and is the answer not in the manual?
Questions and answers