Subscribe to Our Youtube Channel
Summary of Contents for Antik LoRaWan Tester
- Page 1 ANTIK LoRaWan Tester 30.4.2018 User manual ANTIK LoRaWan Tester User manual Issued by: Martin Kocik Reviewed by: Approved by: Igor Kolla Date of issue: 30.4.2018 Revision: Date of revision: 30.4.2018 Revision 0 Internal document Page 1 of 4...
- Page 2 ANTIK LoRaWan Tester 30.4.2018 User manual 1 Power ON/OFF To power on the device, slide the power switch to the left. To power off device, slide power switch to the right. 2 Charging To recharge device battery, please use standard micro USB cell phone charger. During charging the “power plug”...
- Page 3 ANTIK LoRaWan Tester 30.4.2018 User manual Available frequency bands: EU – Europe setup for 868MHz (Europe, Russia, South Africa, Saudi Arabia) AS – Asia setup for 923MHz (Indonesia, Singapore, Malaisia, Thailand, Vietnam) IN – India setup for 865MHz (India only) US –...
- Page 4 ANTIK LoRaWan Tester 30.4.2018 User manual When data are send to server successfully, server sends acknowledge message to tester. When this acknowledge message is received, RSSI value in dB is displayed on LoRaWan screen. RSSI = Receiver signal strength indicator. Value could change from -20dB (the best value, you are very close to gateway) up to -136dB (the worst value, you are on the edge of gateway coverage area).
Need help?
Do you have a question about the LoRaWan Tester and is the answer not in the manual?
Questions and answers