Wan Settings; Dynamic Ip - SOYO AVRO3001 User Manual

VoIP router.

5.2 WAN Settings

The AVRO 3001 VoIP router supports 3 types of WAN connection:
•

Dynamic IP

• PPPoE
• Static IP
5.2.1 Dynamic IP
This mode allows the AVRO 3001 VoIP router to enable its DHCP client
to get an IP address from your High Speed Service Provider. The Host
Name is optional, but may be required by some High Speed Service
Providers.
The default MAC address is set to the WAN's physical interface on the
AVRO 3001 VoIP router.
If required by your High Speed Service Provider, you can use the Clone
MAC Address button to copy the MAC address of the Network Interface
Card installed in your PC and replace the WAN MAC address with this
MAC address. If necessary, you can restore the MAC address to the factory
setting. (See Section 8.1)
Figure 5-4
9