ADEMCO 5817 Installation Instructions

Multi-point universal transmitter

Download this manual

Dear Tech-Man Subscriber:

ADEMCO apologizes for any misunderstanding that has arisen due to our recent

decision to have our technical information removed from the Tech-Man web site. You

may appreciate that one of our key concerns is to provide installing security dealers with

timely and accurate information on our products, and we were concerned about the data

posted to the Tech-Man web site. For obvious reasons, we also do not wish unauthorized

individuals to have access to information on installing and configuring ADEMCO

systems. These concerns were what prompted us to ask Tech-Man to stop posting

ADEMCO installation instructions and user manuals.

Several of you have written us to ask that we reconsider this decision. We have.

We will not require Tech-Man to remove the ADEMCO data. ADEMCO, however, is

not responsible for the operation and maintenance of this site - thus we cannot guarantee

the timeliness or accuracy of the information posted on the Tech-Man web site.

The ADEMCO web site is located at

timely data about our products. You may request a PIN number for access to the

ADEMCO Technical Support web site and FAXBACK system.

If you need assistance on troubleshooting, or if you have other technical questions

about our products not addressed in the information posted at our web site, please contact

ADEMCO Technical Support at 800-645-7492.

Thank you for understanding.

www.ademco.com

and contains accurate

Sincerely,

Herb Lustig

Need help?

Do you have a question about the 5817 and is the answer not in the manual?

Page 1 Several of you have written us to ask that we reconsider this decision. We have. We will not require Tech-Man to remove the ADEMCO data. ADEMCO, however, is not responsible for the operation and maintenance of this site - thus we cannot guarantee the timeliness or accuracy of the information posted on the Tech-Man web site.
Page 2: Installation Instructions
DAMAGE IS CAUSED BY THE SELLER'S OWN NEGLIGENCE OR FAULT. 3. Set the system ready for learning the ID code of one of the 5817's loops (inputs) to Seller does not represent that the products it sells may not be compromised or be used, as described in the control's instructions.
Page 3 Dimensions 1-9/16"W x 3-1/2"H x 1-3/16"D (40mm x 89mm x 30mm) PRIMARY LOOP (INPUT 1): AS SET ON DIP SWITCH Battery 3V Lithium (see BATTERY INSTALLATION/REPLACEMENT). Diagram 2: No. 5817 (SHOWN WITH COVER REMOVED) Ñ 2 Ñ Ñ 3 Ñ...