Advertisement
fig 1
fig 2
fig 3
3. To install and uninstall the front wheel (fig 3 )
Align the swivel wheel assembly to front leg of pram and push on firmly until
a click is heard ( A ). Hold the front wheel assembly, twist fixed key above the front
wheel assembly anticlockwise. Pull it downward to remove the wheel assembly. ( B )
fig 4
4. To use the front wheel (fig 4 )
Push locking clip down to lock the wheel into non-swivel position ( A ). Lift up
to release ( B ).
1. Package content (fig 1 )
2. To open the pram (fig 2 )
Release the transportation lock (located on
the rear leg) by depressing lock.
Lift the handle up until the pram locks into
the fully upright position.
click
B
A
A
B
5. To install rear bracket ( fig. 5 )
fig 5
Align the rear wheel bracket with the rear frame
and push on until the buttons snap into the
holes. Make sure both sides are on
completely.
click
click
fig 6
A
B
6. To install rear wheel ( fig. 6 )
Slide the rear wheel's axle into the hole in the frame until the wheel
is secured well ( A ). To remove the rear wheel, pull the clip and pull the wheel out
as showed in ( B ). Press brake lever down to lock the wheels ( C ). Lift brake lever
up to release the brakes ( D ).
Warning: Always apply brake whenever you park the pram.
fig 7
C
D
7. To install and uninstall front tray (fig. 7)
Align front tray with the joint push until
the buttons snap into the holes. Make
sure it is secured well by pulling.
Depress the buttons simultaneously,
which are located joint bottom, pull the
tray out to remove the tray.
Advertisement
