Advertisement
Multi Function Cable Tester
3. If no cable is connected to the tester, it will "beep" twice and display the message "Empty":
You can select UP and DOWN to check each pin to pin test result, or press ENTER to select pin number. By
pressing BACK you return to main menu.
Fast Test
The cable tester also provides a "Fast Test" function to test a large numbers of cables in a short time:
1. Select "Fast Test" in the main menu then press ENTER.
2. Select "Define Standard" to create the standard pin to pin connectivity as the model, the standard will be
compared to the other cables and determine whether the cable is good or bad. The default setting is to save
automatically.
3. When the standard is defined, select "Test Cable" to check cable's status. If the cable's pin to pin
connectivity matches the standard, the cable tester will show "OK" and will display the detailed pin to pin
connectivity. If not, the cable tester will show "Error" and also display the cable's detailed information to
make it easy to identify the problem.
Save, Delete, Browse and Upload the Record
1. Press the SAVE button to save the last test result (saving sequence is from 1 to 100).The LCD Display will
show:
2. By pressing the DELETE button, the tester will display two options in the menu: "Delete All" or "Delete One"
Press the UP or DOWN button for the desired selection and confirm your selection by pressing ENTER
5
User Manual
Advertisement
