Advertisement
Quick Links
TM-B-OP-05N
TM-B-OP-10N
TM-B-OP-20N
# Marking of changes to prior edition
TM chain blocks meet requirements as per EU Machinery Directive 2006/42/EG and
were type tested by a certification body (TÜV Rheinland inspection agency).
Read this manual before using the TM Chain Block.
This manual includes very important information concerning safety and operation.
TM - Chain Blocks are not intended for lifting, carrying or transporting of persons
Death or injury can occur from improper use or maintenance.
Art.-No.: B07725-F
M A N U A L
TM - Chain Blocks
Original operating instructions in keeping
with the EC Machinery Directive
TM-B-OP-30N
TM-B-OP-50N
Warning Note
and thus must not used for this purpose!
- 1 / 9 -
TM-B-OP-100N
Edition: EN-100415
Advertisement
Related Manuals for Thiele TM Series
Summary of Contents for Thiele TM Series
- Page 1 M A N U A L TM - Chain Blocks Original operating instructions in keeping with the EC Machinery Directive TM-B-OP-05N TM-B-OP-30N TM-B-OP-10N TM-B-OP-50N TM-B-OP-20N TM-B-OP-100N # Marking of changes to prior edition TM chain blocks meet requirements as per EU Machinery Directive 2006/42/EG and were type tested by a certification body (TÜV Rheinland inspection agency).
- Page 2 General features TM chain blocks are inter alia employed in the construction industry, in mining opera- tions, marine applications and other sectors of industry. Significant characteristics are: Overload protection Automatic, double-pawl braking system Stainless steel load chain to EN 818-7, type T, electrogalvanized Safety Notes The subsequent safety information provides an overview of the general methods of ac- tion in order to safely operate TM manual chain blocks.
- Page 3 22. Do not lift any load over people. 23. When lifting a load start with tightening the chain slowly. 24. Do not lift the load jerkily. 25. Never cause a suspended load to swing. 26. Never leave a suspended load unattended. 27.
- Page 4 in the load’s center of gravity. Ensure hooks are seated correctly and the safety latches are engaged. Also make sure that chains and hooks are not twisted, knotted or have cracks. Lifting the load: Ensure that there are no people or obstructions in the immediate area of the moving load.
- Page 5 fixed by a bolt to the upper hook suspension. Pay attention that the chain strands are not twisted. If necessary, shorten the chain by removing a link. Secure the chain bolt with a new splint. Perform a functional test using a low load. Check that the chain strands are not twisted, that the chain is not touching the housing bolts and that it flawlessly glides into the chain guide.
- Page 6 Maintenance and repair The repair of a chain block must exclusively be performed by a service workshop au- thorized by THIELE. In this case please refer to one of the service addresses. Replacing the chain: Relieve the chain block of load and loosen the chain bolt on the hook tackle or suspen- sion console in the event of a twin-strand reeving as well as on the chain end fitting.
- Page 7 Nearly all parts are made of steel and should be scrapped in accordance to local regula- tions. THIELE GmbH & Co. KG will not assume any responsibility for failures or damage that may result from a non appropriate use of the products or a non-observance of the product documentations.
- Page 8 Spare parts Item Description Item Description Item. Description Gearbox cover Hand chain wheel Ball bearing, hook Housing plate, gear side Hand chain Hook nut Housing plate, handwheel Housing cover, handwheel Sprocket, top/bottom block Gearwheel stage Hex. nut, self-locking Needle bearing, sprocket Sprocket, complete Guide roll Bracket, hook suspension...
- Page 9 Additional weight for special chain lengths [kg/m] Service address THIELE GmbH & Co. KG, Postfach 8040, 58618 Iserlohn, Tel. +49(0)2371/947-0 Warranty For TM chain blocks, a one-year warranty is granted from the date of purchase for de- fective materials or executions. Wear parts as well as parts that have been overloaded and incorrectly used are excluded from the warranty.
Need help?
Do you have a question about the TM Series and is the answer not in the manual?
Questions and answers