Waeco BatteryPack BP 124 Operating Manual page 18

Using the device
6.3 Checking the charge level
➤ If necessary, disconnect the charger from the battery.
➤ Press the P button.
✓ The battery shows the charge level. The more LEDs that light up, the
higher is the battery charge level.
6.4 Switching on the back-light
➤ Press and hold the P button for between one and three seconds.
✓ The back-light switches on.
6.5 Switching off the back-light
➤ Press and hold the P button for between one and three seconds.
✓ The back-light switches off.
6.6 Replacing the fuse
To replace a blown fuse, proceed as follows (fig. 4, page 4):
➤ Using a cross-bladed screwdriver, release the fuse-holder cap by turning
it anti-clockwise.
➤ Replace the fuse with one of the same rating.
➤ Using a cross-bladed screwdriver, refit the fuse-holder cap by turning it
clockwise.
18
BP124
EN