Pioneer CX-3250 Service Manual page 111

5
16. SENSOR Test
Sensor information (AD value, running status, installation status on main body and
error at sensor learning) is displayed on the screen.
G SENSOR / SIGMA : Display of G-sensor voltage value
GYRO / SIGMA : Display of GYRO voltage value
POWER : Display of power supply voltage
TEMPERATURE : Display of Temperature
FIT UP : Display of installation status
DISTANCE : Display of distance calculation status
LOW SPEED : Display of the lowest output speed of low speed NG vehicle
(Depending on the status of DISTANCE)
Display Content of FIT UP
Display Status
NG Installation Position, NG
OK Installation Position, OK (The third-best)
OK(Better) Installation Position, OK (The second-best)
OK(Best) Installation Position, OK (The best)
Display Content of DISTANCE
Display Status
INITIALIZE Sensor under initial learning
GPS GPS Distance (Pulse not connected at the model without G sensor)
G-SENSOR G sensor distance (Simplified hybrid)
ND-PG1 ND-PG1 Distance
SPEED PULSE Vehicle speed pulse distance
Display Content of LOW SPEED
DISTANCE Status of SPEED PULSE
SPEED PULSE Low speed vehicle speed pulse under learning
Low speed vehicle speed pulse, OK
Low speed vehicle speed pulse, NG
Others
5
6
AVIC-X930BT/XNUC
6
7
Display
CHECK
OK
NG
-----
7
8
A
B
C
D
E
F
111
8