Table of Contents
Summary of Contents for MOULDPRO MHN-PS01
- Page 1 _____________________________________________________________ User Guide Transformer For Heated Gate Cutters CAUTION: Please read this instruction manual thoroughly, before start using the transformer MHN- PS01. User Guidelines – MHN-PS01 13-06-2019 version 001...
- Page 2 When unplugging the power cord or heated gate cutter cords, always hold the plug, not cord. *Do not drop the transformer, if dropped be sure to check that there is no visual damage, or unusual behavior during operation. User Guidelines – MHN-PS01 13-06-2019 version 001...
- Page 3 5) Let the gate cutter heat up, it take takes approximately 20-25 minutes to reach the set temperature. 6) The unit are now ready for use. Front panel Output for black connector Output for red connector Heat adjustment min./ max. Power on/off switch Back panel User Guidelines – MHN-PS01 13-06-2019 version 001...
- Page 4 2014/108/EC (Electromagnetic Compatibility) Type of equipment: Power Transformer 85-264 VAC to 24V Model name: MHN-PS01 Manufacture’s name: Mouldpro ApS Manufacturer’s address: Baltorpbakken 10 2750 Ballerup Denmark Date: February 22, 2019 Signature: Stefan Hansen, Managing Director User Guidelines – MHN-PS01 13-06-2019 version 001...
- Page 5 Change log Date of change Change Version 13-06-2019 New manual User Guidelines – MHN-PS01 13-06-2019 version 001...
Need help?
Do you have a question about the MHN-PS01 and is the answer not in the manual?
Questions and answers