Initial Version 1.2 Welcome to Dino Park! Thanks for purchasing the MakeProAudio Dino Park Board / MakeKit / MakeKit EX / MakeKit EXL! The greatest pleasures are simple pleasures. A hardware synth like Dino Park is instant-on and instantly ...
MakeProAudio MakeKit Quick Start Guide V1.0 2. Hardware Quickstart 2.1 Hardware Assembly As a first step you need to assemble the kit we supplied to you. For an overview of how Dino Park is assembled, refer to the “explosions” below. Detailed step by step assembly instructions are available via our support page. ...
MakeProAudio MakeKit Quick Start Guide V1.0 2.2 Rear Faceplate - Connectors Note: only MakeKit EX and MakeKit EXL come with the Breakout Extension board (version pictured here). Lower Row, from le t to right POWER SWITCH ...
Page 5
MakeProAudio MakeKit Quick Start Guide V1.0 Upper Row, from le t to right - only when Expansion Board is installed (MakeKit EX + EXL) MIDI IN via 3.5mm TRS Connect the MIDI output of your keyboard, MIDI interface or sequencer to the MIDI IN of your DinoBoard to ...
Le t Encoder Encoder for selecting the Plugin Model and the MIDI Channel and DinoBoard (A-B)* * Board stacking is not yet supported in the V1.0 Release. Please check www.makeproaudio.com/support for news and updates. Right Encoder Encoder for selecting presets and controlling the device volume ...
MakeProAudio MakeKit Quick Start Guide V1.0 2.4 Front Panel Features Selecting Synth Models The currently loaded model is shown in the display with a little triangle before its name. To change the model, scroll through available models by turning the encoder to the le t of the display. To confirm the selection and ...
MakeProAudio MakeKit Quick Start Guide V1.0 2.5 Setup Examples Here are two setup examples - one stand-alone, one with a computer connected: USB MIDI Stand-alone Setup Connect your Dino Park to a power source with the included power supply ...
Page 9
MakeProAudio MakeKit Quick Start Guide V1.0 Computer Setup Connect your Dino Park to a power source with the included power supply 2. Connect TRS audio cables from Analog Right / Le t to your audio interface (or directly to active ...
MakeProAudio MakeKit Quick Start Guide V1.0 3. Dino Park Editor So tware / VSTis Dino Park is perfect to play great sounds in a most compact, robust and easy way . However, the front Display Panel does not provide access to all sound parameters on the unit. For that reason we have created editor ...
Page 11
MakeProAudio MakeKit Quick Start Guide V1.0 current parameter settings. Therefore, it is critical for the MIDI routing in your sequencer to deliver MIDI events from the DinoPark MIDI driver to all instances of the Dino Park VSTi Editors. Download Editor So tware / VSTi ...
MakeProAudio has taken all possible steps to ensure that the information given here is both correct and complete. In no event can MakeProAudio accept any liability or responsibility for any loss or damage to the owner of the equipment, any third party, or any equipment which may result from the use of this manual or the ...