Summary of Contents for Riffel RF198
- Page 1 RIFFEL MEAT GRINDER RF198 INSTRUCTION MANUAL Please read carefully and keep the instruction well DESIGNED IN GERMANY MADE IN CHINA...
- Page 2 DESCRIPTION IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed including the following: It is for household use, do not use outdoors. Unplug from outlet while not in use, before putting on or taking off parts, and before cleaning.
- Page 3 Continuous running of meat grinder should be not more than 10 minutes with the following 10minutes interval for motor cooling. Operate the unit from “ON” to “R” or from “R” to “ON” after the previous working condition stops more than 30 seconds, or it may cause some unnormal case such as moving up and down and easily destroy the unit.
- Page 4 screw slightly until it is connect into the head inlet (fig.3). Place the blade onto the shaft of feeding screw with the blade facing the front as illustrated (fig.4).If it is not fitted properly, meat will not be mincing. ...
- Page 5 Fry onion until brown and add minces mutton, all spice, salt and flour. OUTLET COUVER Lean meat 450g Flour 150-200g Spices to your taste Nutmeg (cut finely) Powdered red pepper to your taste Pepper to your taste Mince meat three times and mix all ingredients together in a bowl. More meat and less flour for outlet cover create better consistency and taste.
- Page 6 Disassemble by reversing the steps from 1-6 pictures. To remove the cutting plate easily, place a screwdriver between the cutting plate and the head as illustrated and lift it up (fig.12). Press the fasten knob，move the head as per direction illustrated on fig 13,then you can take out the head.
- Page 7 www.riffelappliances.de...
Need help?
Do you have a question about the RF198 and is the answer not in the manual?
Questions and answers