Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Ardisam Manuals
  4. Drill
  5. Earthquake E43WC
  6. Operator's manual & parts explosions

Ardisam Earthquake E43WC Operator's Manual & Parts Explosions

Woodchuck power drill
Hide thumbs

Advertisement

Quick Links

Download this manual
OPERATOR'S MANUAL &
E43WC WOODCHUCK POWER DRILL
ARDISAM
.com
OME43WC
Rev. 7/23/07
© Copyright 2007 Ardisam, Inc.
All Rights Reserved. Printed in USA.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Earthquake E43WC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Ardisam Earthquake E43WC

Summary of Contents for Ardisam Earthquake E43WC

  • Page 1 OPERATOR’S MANUAL & PARTS EXPLOSIONS E43WC WOODCHUCK POWER DRILL ARDISAM .com OME43WC Rev. 7/23/07 © Copyright 2007 Ardisam, Inc. All Rights Reserved. Printed in USA.

  • Page 3: Table Of Contents

    Ardisam will furnish 100% parts and labor to correct any defect caused by faulty material or workmanship. Warranty work must be sent directly to Ardisam, Inc. and performed by them or by an authorized service center. To obtain warranty service and/or replacement instructions, you must have prior approval before shipping package by calling our customer service department at 800-45-6007 for a return material authorization number (RMA#).

  • Page 4: Safety

    Temperature of muffler and nearby areas may exceed 150º F (65º C). Avoid these areas. • Never run engine indoors or in an enclosed area. Engine exhaust contains carbon monoxide, an odorless and deadly gas. • Use only original equipment parts from Ardisam including all nuts and bolts. page 4 800-45-6007...
  • Page 5 ASSEMBLY INSTRUCTIONS ANd pARTS ExpLOSIONS E43WC Model ENGINE SAFETY pRECAUTIONS • Allow fuel fumes/vapors to escape from the area before starting engine. Warning Carbon Monoxide poisoning • Test the fuel cap for proper installation before starting and All engines contain carbon monoxide in their exhaust. Carbon using engine.
  • Page 6 ASSEMBLY INSTRUCTIONS ANd pARTS ExpLOSIONS E43WC Model OpERATION CAUTION STEpS FOR WORkING ON ENGINE OR pOWER dRILL dO NOT ALTER/MOdIFY ENGINE: 1. Turn off engine switch. AvOId INjURY! NEvER ALTER OR MOdIFY ThE ENGINE FROM ThE FACTORY. SERIOUS INjURY 2. Disconnect the spark plug wire from the spark plug. OR dEATh MAY OCCUR IF ENGINE IS MOdIFIEd OR ALTEREd.
  • Page 7 ASSEMBLY INSTRUCTIONS ANd pARTS ExpLOSIONS E43WC Model Filling Gas Tank CAUTION 1. Shut-off engine and allow engine to completely cool before refill- ing the gas tank. AvOId INjURY! ALWAYS hANdLE FUEL IN A WELL 2. Move to a well ventilated area, outdoors, away from flames and vENTILATEd AREA, OUTdOORS, AWAY FROM sparks.
  • Page 8 ASSEMBLY INSTRUCTIONS ANd pARTS ExpLOSIONS E43WC Model STARTING ANd STOppING ENGINE CAUTION • Move engine to a well ventilated area, outdoors, to prevent car- bon monoxide poisoning. AvOId INjURY! ALWAYS hANdLE FUEL IN A WELL • Move to an area away from flames or sparks, to avoid ignition of vENTILATEd AREA, OUTdOORS, AWAY FROM vapors if present.

  • Page 9: Operation

    ASSEMBLY INSTRUCTIONS ANd pARTS ExpLOSIONS E43WC Model hOT ENGINE START: CAUTION 1. Continue with Step 4 of Cold Engine Starting. 2. If engine does not fire, refer to Step 1 of Warm Engine Starting. TO pREvENT ACCIdENTAL STARTING: dO NOT attempt to start engine in the following ways: AvOId INjURY! ENGINE MUST BE TURNEd OFF ANd COOL, ANd SpARk pLUG WIRE MUST BE RE- •...
  • Page 10 ASSEMBLY INSTRUCTIONS ANd pARTS ExpLOSIONS E43WC Model Spark plug CAUTION The recommended spark plug is a NGK BM6A which cross refer- ences to a Champion CJ8. AvOId INjURY! TO AvOId INjURY OR dEATh, NEv- 1. Check spark plug every 50 operating hours. ER SIphON FUEL BY MOUTh.

  • Page 11: Service, Troubleshooting & Repair

    SAFETY AT ALL TIMES. ENGINE MUST BE TURNEd OFF ANd ALLOWEd TO COOL, ANd At Ardisam, we build quality and durability into the design of our SpARk pLUG WIRE MUST BE dISCONNECTEd products; but no amount of careful design by us, and careful main- BEFORE ATTEMpTING ANY MAINTENANCE OR tenance by you, can guarantee a repair-free life for your auger.

  • Page 12: Troubleshooting

    ASSEMBLY INSTRUCTIONS ANd pARTS ExpLOSIONS E43WC Model TROUBLEShOOTING pROBLEM pOSSIBLE CAUSE REMEdY/ACTION Engine will not start 1. Power switch off 1. Flip switch to ON position 2. Spark plug wire disconnected 2. Connect spark plug wire to spark plug 3. Out of fuel 3.

  • Page 13: Parts Explosions

    ASSEMBLY INSTRUCTIONS ANd pARTS ExpLOSIONS E43WC Model E4WC pOWER dRILL pARTS ExpLOSION & pARTS LIST pART dESCRIpTION QTY. 4809 TRIGGER ASSEMBLY W/O CABLE 4814 BOLT 10-24 X 1-1/4” PHILLIPS TRUSS HEAD ZINC 8912 GEAR 44T 3/4” HOLE 8913WC SHAFT 3/4” WITH 1/2” UNF 8915 DOWEL PIN STEEL 1/4”...
  • Page 14 ASSEMBLY INSTRUCTIONS ANd pARTS ExpLOSIONS E43WC Model E4WC ENGINE pARTS ExpLOSION page 14 800-45-6007...
  • Page 15 ASSEMBLY INSTRUCTIONS ANd pARTS ExpLOSIONS E43WC Model E4WC ENGINE pARTS LIST pART pART dESCRIpTION QTY. dESCRIpTION QTY. 300484 FLYWHEEL, MAGNETO 3004132 SCREW, THROTTLE LEVER 300337 NUT, FLANGE M8 300455 PLATE, INTAKE COVER ADAPTER 300462 WASHER, ROTOR 300457 COVER, AIR FILTER 300413 CLUTCH ROTOR ASSEMBLY 300435...

  • Page 16: Cumberland, Wisconsin

    Earthquake, Division of Ardisam, Inc. 1690 Elm Street; P.O. Box 666 Cumberland, Wisconsin 54829 800-345-6007 · Fax (715) 822-2223 E-mail: info@ardisam.com ARDISAM .com...