Pelham PEL RC01 Instruction Manual

Pelham Radio Controlled Talking Watch – PEL RC01/02
Instruction Manual
Your Radio Controlled watch receives the UK atomic time radio Signal transmitted by the NPL
transmitter in Cumbria.
It sets automatically and adjusts itself for Summer or Winter Time. The watch checks the time against
the radio signal every night and makes necessary time adjustments. However it can be set manually if
you are in an area with poor radio reception or travelling overseas.

Button Functions

Time & date announcement
B1 (2 O'clock position)
Press B1once to announce the time
i.e. "The time is two fourteen pm"
Press B1 twice to announce the date
i.e. "Today is Thursday September twenty nine, year two thousand and sixteen"
Press B1 three times to check the radio signal reception
If your watch has successfully updated the time it will announce " UK time updated" If the signal was
not received successfully it will announce " UK time not updated" The watch will keep time as a normal
watch until it next receives the signal.
If the time is not updated it may help to position the watch near a window overnight to allow better
signal reception. ( see picture of how to place watch with metal strap for signal reception, metal strap
should not be covering back of watch).

Alarm function

B2 (4 o'clock position)
Press B2 once to announce the alarm i.e. "The alarm time is seven fifteen am the alarm is on"
To set alarm
Press and hold B2 for 5 seconds the watch announces "Set alarm, press 2 O'clock button to set"
Next press B1 (2 O'clock button) the watch announces "Press 2 O'clock button to set hour, 4 O'clock
button to confirm"
Press B1 again repeatedly until the desired alarm hour is announced i.e
"Seven O'clock am" then press B2 to confirm it ,the watch will announce
"Press 2 O'clock button to set minute, 4 O'clock button to confirm"
Next Press B1 again repeatedly until the desired alarm minute is announced. i.e "Fifteen minute"
Then press B2 to confirm, the watch will announce the alarm time and if alarm is on or off. i.e "
Confirmed alarm time is seven fifteen am, the alarm is on"
To switch alarm on or off
Press and hold B2 for 5 seconds the watch announces " Set alarm, press 2 O'clock button to set" Then
press B2 again the watch announces " Alarm on off, press 2 O'clock button to set"