Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for CountingCars COUNTcam 2
- Page 1 Video Recording System Product Manual Version 3.1 - 2019...
-
Page 2: Table Of Contents
Network - 8 Formatting the Internal Storage - 3 If the Wi-Fi Network Name is Missing or Incorrect - 8 Unable to Connect to the COUNTcam 2 through 3. Installation: 3-5 the app - 8 Selecting a Location - 3... - Page 3 Product Manual...
-
Page 4: Getting Started
COUNTcam 2 uses state of the art technology to allow you to wirelessly set up your recording. Information on how start using the COUNTcam 2, proper equipment installation, data retrieval, and using the booster pack for extended studies is covered in this manual. -
Page 5: Controlling The Countcam 2
COUNTcam 2 wireless network indicator starts blinking in the app (figure 1,1) and through your mobile device. Next, open the the blue LED on the front of COUNTcam 2 is also COUNTcam app on the mobile device connected blinking. -
Page 6: Formatting The Internal Storage
Note: When the mobile device is in portrait mode, • Wear reflective vests / clothing when working the battery indicator of the COUNTcam 2 is much in and around traffic to increase visibility to easier to distinguish and can be seen in Figure 2, 2. -
Page 7: Installing The Camera On A Street Sign Using The Adjustable Pole
Make sure the COUNTcam 2 is pointed in the COUNTcam app the proper direction by using the live stream on and adjust as needed. -
Page 8: Adjusting The Pitch Using The Indexer
After the recording period has ended, carefully is in the viewable area of take down the COUNTcam 2 from the large post or the camera. by lowering the extension pole. Press the indexer in on the •... -
Page 9: Using The Countcam Video Uploader
COUNTcam 2 to allow the 1. Select the (+) icon on the right side of the COUNTcam 2 to record up to 100 hours of video program and navigate to the COUNTcam 2 footage on a single charge. -
Page 10: Connecting The Booster Pack
Adjustable Pole near the camera. The The charging indicator will turn off when charging weight of the Booster Pack + COUNTcam 2 can is complete. It takes approximately 15 hours to create a pendulum effect in windy conditions. -
Page 11: Troubleshooting
Then, push the power button network does not appear in the list of wireless on the COUNTcam 2 and allow 10 seconds for networks in range, try refreshing the network list the COUNTcam to start broadcasting it’s wireless on your mobile device. -
Page 12: Unable To Connect The Countcam To A Computer
1-3 seconds. If the blue LED does not illuminate read. when you plug the COUNTcam 2 into a computer, that means the COUNTcam 2 is powered up or it is Fully charge the COUNTcam 2. If your COUNTcam not making a connection with the computer. - Page 13 The recorded video footage comes directly form the camera and will not have any lag or inconsistency. The COUNTcam 2 and Booster Pack have a green charging indicator that illuminates when charging, and will turn off when the batteries are fully charged.
Need help?
Do you have a question about the COUNTcam 2 and is the answer not in the manual?
Questions and answers