Topwisdom TL-403 User Manual

Topwisdom TL-403 User Manual

Laser engraving and cutting control system
Table of Contents

Advertisement

User's Manual for
TL-403 Laser Engraving
and Cutting Control
Shenzhen Topwisdom Technology Co., Ltd
Add: 4F, NO.58, East Side of Yousong Road, New Longhua District, ShenZhen, China,
518109
Tel:
+86-0755-82057902
Fax:
+86-0755-82057892
Website: http://www.topwisdom.com.cn
System

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TL-403 and is the answer not in the manual?

Questions and answers

Summary of Contents for Topwisdom TL-403

  • Page 1 User’s Manual for TL-403 Laser Engraving and Cutting Control System Shenzhen Topwisdom Technology Co., Ltd Add: 4F, NO.58, East Side of Yousong Road, New Longhua District, ShenZhen, China, 518109 Tel: +86-0755-82057902 Fax: +86-0755-82057892 Website: http://www.topwisdom.com.cn...
  • Page 2 Disclaimer Topwisdom Technology reserves the right to modify the content described in this manual without advance notice. Topwisdom Technology is not responsible to any direct, indirect, or consequential damage or liability caused by improper use of this manual or the product.
  • Page 3: Table Of Contents

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd Content Part 1 Overview ....................... 1 1.1 System Overview ....................1 1.2 Notes and Warning..................... 2 1.3 Work Environment ....................2 1.4 Power Supply and Grounding ................2 1.4.1 Power supply requirements ..............2 1.4.2 Grounding requirements ................
  • Page 4 泰智科技 Shenzhen Topwisdom Technology Co., Ltd 3.1 Installing CoreDRAW Direct Output..............20 3.1.1 Manual Install ..................21 3.1.2 Auto install ....................22 3.2 Uninstalling CorelDRAW Direct Output ............23 3.3 Installing CAD Direct Output ................23 3.4 Uninstalling CAD Direct Output ............... 25 3.5 USB Driver Installation ..................
  • Page 5 泰智科技 Shenzhen Topwisdom Technology Co., Ltd 4.4.4 Supplementary Description of Carving ..........61 4.4.5 Supplementary Description of Software and CAD Direct Output ..62 Part 5 The Operation Panel ................... 66 5.1 The Panel Operation and Buttons Function Introduction ........ 66 5.1.1 The Panel ....................
  • Page 6 泰智科技 Shenzhen Topwisdom Technology Co., Ltd 6.3 The PC Connection Question ................92 6.4 The Reading and Writing of U disk Question ..........93...
  • Page 7: Part 1 Overview

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd Part 1 Overview 1.1 System Overview Thank you very much for using laser engraving control system of our company! This system can be used with various types of laser engraving cutting machine, meets your different requirements for processing.
  • Page 8: Notes And Warning

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd 1.2 Notes and Warning  Prohibit the non-professionals to maintenance and debug the electrical system, if not, this will reduce device’s safety performance, and expand failure, even cause accident and property loss.  Please do not piles up debris on the control box, and in the course of using, regularly remove the dust of the control box surface and filters, to keep good ventilation.
  • Page 9: Accessory List

    Grounding resistance is less than 100 ohms; the length of wire cable is within the 20meters, the cross-sectional area of the wire cable is larger than 1.0 mm 1.5 Accessory List The Laser Engraving Control System-TL-403 contained the accessories as below: Name Introduction...
  • Page 10 泰智科技 Shenzhen Topwisdom Technology Co., Ltd 3.USB communication extended cable 1.Crossover Ethernet Cable Crossover Ethernet 2.Network Cable communication extended cable...
  • Page 11: Part 2 Wiring Installation Instruction

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd Part 2 Wiring Installation Instruction 2.1 System Wiring Diagram Control 5V Relay damper Axis V Driver Axis Z Driver Axis Y Driver Axis X Driver (Laser head2 motor) (Feeding motor) (Y motor) (X motor)
  • Page 12: Installation Dimension

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd 2.2 Installation Dimension 2.2.1 Panel The installation dimension of operation panel (the unit is MM): Face: Fig. 2-2 Bottom:...
  • Page 13: Mainboard

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd Fig. 2-3 2.2.2 Mainboard The installation dimension of mainboard (the unit is MM): Fig.2-4...
  • Page 14 泰智科技 Shenzhen Topwisdom Technology Co., Ltd Fig.2-5...
  • Page 15: Wiring Instruction

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd 2.3 Wiring Instruction 2.3.1 Interface Broad LASER-2 LASER-1 EX5V XGND PWM1 IN-5 DIR1 IN-4 XGND IN-3 EX5V IN-2 PWM2 EX5V DIR2 XGND XGND IN10 EX5V IN-9 PWM5 IN-8 DIR5 IN-7 XGND EX5V EX5V XGND...
  • Page 16 泰智科技 Shenzhen Topwisdom Technology Co., Ltd X Driver PUL+ PUL- DIR1 DIR+ DIR- PWM1 ENA+ ENA- 36V- Motor 36V+ Fig. 2-7 2. Panasonic Servo Wiring Panasonic servo PULS1 DIR1 PULS2 PWM1 SIGN1 SIGN2 24V- COM- Motor 24V+ COM+ Fig. 2-8...
  • Page 17 泰智科技 Shenzhen Topwisdom Technology Co., Ltd 1. CO2 Laser Power Supply Wiring EX5V PWM3 DIR3 IN-1 XGND Water Potect Active low TTL-H TTL-L Laser Power Supply Fig. 2-9 2.RF Laser Wiring EX5V PWM3 DIR3 IN-1 XGND Water Protect Laser Power...
  • Page 18 泰智科技 Shenzhen Topwisdom Technology Co., Ltd The wiring of laser 2 is similar. Note:When “RF1 or RF2” is selected, please set the PWM Frequency according to the data sheet of the laser. Generally, PWM Frequency is 5000Hz. And set the Laser Max parameter not larger than 95%, especially not to set as 100%, otherwise it works improperly.
  • Page 19: Interface Instruction

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd Photoelectric limit switch XGND IN-5 IN-4 IN-3 IN-2 EX5V X Origin limit switch Fig. 2-13 Other limit switch wirings are similar. 2.4 Interface Instruction 2.4.1 Power Signal  The system is dual 5V power supply ...
  • Page 20: U-Disk Port

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd 2.4.2 U-DISK Port Label U-DISK, can directly insert the U disk to read and write. 2.4.3 PC Connection Port Label PC connection port, can connect PC to read and write with USB. 2.4.4 NETWORK Port Label NETWORK, can connect PC to read and write by network.
  • Page 21 泰智科技 Shenzhen Topwisdom Technology Co., Ltd EX5V External 5V power source positive (output) PUL+, DIR+ PWM5 Step pulse (output) PUL- DIR5 Direction signal (output) DIR- External 5V power source grounding (output)  V axis interface J22 Definition EX5V External 5V power source positive (output) PUL+, DIR+...
  • Page 22: Laser Power Interface

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd OUT6 Reserved XGND External 5V power source grounding (output)  The relay control signal interface J9 Definition EXV+ Connect to pin 1 of J10 or external 5V/24V power source OUT7 In the brush mode, lifting signal, high effective, connect to the relay coil ―+‖...
  • Page 23: Input

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd conservation (active low). XGND External 5V power source grounding(output)  The interface of laser power 2 – J5 Definition EX 5V External 5V power source positive (output) PWM4 Be used to control the laser When the laser is RF laser, used to control the power intensity of the laser.
  • Page 24 泰智科技 Shenzhen Topwisdom Technology Co., Ltd sensor input IN-4 Y upper limit, axis movement to the max coordinate limit sensor input IN-5 Y origin limit, axis movement to the minimum coordinate(0)limit sensor input XGND External 5V power source grounding (output) ...
  • Page 25: Input Signal Diagram

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd The connection ways of switch input signal:  When using approaching switch, the corresponding parameters of upper PC must be set as ―Negative‖ by NPN; the corresponding parameters of upper PC must be set as ―Positive‖ by PNP.
  • Page 26: Part 3 Software Installation

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd Part 3 Software Installation 3.1 Installing CoreDRAW Direct Output CorelDRAW12 or a higher version needs to be installed firstly. Then double click the icon (below CorelCamera_V8.7.8 is used to introduce), a screen shown in Fig. 3-1 will be displayed for selecting installing language.
  • Page 27: Manual Install

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd Fig. 3-3 3.1.1 Manual Install Click the button to find the CorelDRAW install path, as shown in Fig.3-4, select the Corel Graphics 12 folder as below. Fig. 3-4 When the installed path is found, click the Confirm to go back to the screen shown in Fig.3-3.
  • Page 28: Auto Install

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd Fig. 3-5 3.1.2 Auto install Click the ―Auto install‖ button shown in Fig. 3-3, the program will find the install path automatically. When installation is finished, the screen shown in Fig. 3-5 is displayed.
  • Page 29: Uninstalling Coreldraw Direct Output

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd Fig. 3-7 In Fig. 3-7, first click on the ―VBA‖ as pointed out by the arrow in the left, then choose the "Delay Load VBA" at the bottom, the installation is thoroughly completed. 3.2 Uninstalling CorelDRAW Direct Output...
  • Page 30 泰智科技 Shenzhen Topwisdom Technology Co., Ltd AutoCAD2007-2009. Double click the icon , to unzip files, then the screen shown in Fig. 3-8 is displayed. Fig. 3-8 Click ―Next‖ to proceed with installation. Select the installing language Fig. 3-9 When finished selecting language, click ―…‖ button to select the install path. Then click...
  • Page 31: Uninstalling Cad Direct Output

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd Fig. 3-10 When the installation is finish, the installing program will be closed automatically. 3.4 Uninstalling CAD Direct Output Click the LaserT Uninstall, show as Fig. 3-11. Fig. 3-11 Click ―Yes‖ to uninstall in Fig. 3-12.
  • Page 32: Usb Driver Installation

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd Fig. 3-13 3.5 USB Driver Installation Insert the USB Cable, the power on, Fig. 3-14 will be shown on the Compute, and then the Fig. 3-15 will be shown: Fig. 3-14 Select ―No, not this time‖...
  • Page 33 泰智科技 Shenzhen Topwisdom Technology Co., Ltd Click the "Next", show as Fig. 3-16 Select ‖Install from a list or specific location (Advance)‖ Click the "Next" Fig. 3-16 Click the "Next", show as Fig. 3-17. Click ―Browse‖ Click Click ―Include this ―Next‖...
  • Page 34 泰智科技 Shenzhen Topwisdom Technology Co., Ltd Browse to the USB driver folder by clicking the browse button. Once the file path has been entered in the box, click next to proceed. Select driver folder Click OK Fig. 3-18 The screen shown in Fig. 3-19 will be displayed as Windows XP copies the required driver files.
  • Page 35: Usb Port Setting

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd Click Finish Fig. 3-20 USB driver must be installed twice. Repeat the installation steps above once again. 3.6 USB Port Setting After the engraving card power on, connect the PC with USB cable, the computer will assign a COM port to communicate.
  • Page 36 泰智科技 Shenzhen Topwisdom Technology Co., Ltd Fig. 3-21 Double click the "System", show as Fig. 3-22. Fig. 3-22...
  • Page 37 泰智科技 Shenzhen Topwisdom Technology Co., Ltd Fig. 3-23 Click the device management. assigned COM port Fig. 3-24...
  • Page 38: Change The Assigned Com Port By Computer

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd 3.6.2 Change the Assigned COM port by Computer On Fig. 3-24 USB Serial Port(COM4) is the assigned COM port, the way and the steps that change the assigned COM port are as follow: Double click USB Serial Port(COM4), show a window, single click Port settings, show as Fig.
  • Page 39: Ip Setting

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd Fig. 3-26 Click "OK", display a window of Communications Port Properties, as Fig. 3-27 Fig. 3-27 Click "Yes" to finish. 3.7 IP Setting Enter the control panel...
  • Page 40 泰智科技 Shenzhen Topwisdom Technology Co., Ltd Fig. 3-28 Double click network connection. Fig. 3-29 Double click "Local Connection".
  • Page 41 泰智科技 Shenzhen Topwisdom Technology Co., Ltd Fig. 3-30 Double click TCP/IP setting. Fig. 3-31...
  • Page 42 泰智科技 Shenzhen Topwisdom Technology Co., Ltd Select ―Use the following IP address‖, set the IP, Subnet mask, Default gateway, as below figure. Fig. 3-32...
  • Page 43: Part 4 Software Operation Guide

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd Part 4 Software Operation Guide 4.1 CorelDRAW Direct Output Software Operation Open the CorelDRAW software, show as Fig. 4-1 Fig. 4-1After startup, our processing buttons will be automatically mounted on the menu shown in Fig. 4-1 as pointed out by the arrow. After completing the figure, we can click on the ―Laser Carve‖...
  • Page 44: Layer Parameter Setting

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd 4.1.1 Layer Parameter Setting It uses different colors for the configuration of engraving parameters, if there are imported bitmaps, there will be independent bitmap settings. You can select a certain color and double click or click on button ―Parameter Settings‖ for settings of these drawings, and then the menu shown in Fig.
  • Page 45 泰智科技 Shenzhen Topwisdom Technology Co., Ltd The two most important parameter settings are Outline output and Carve output. If neither of the two is selected, ―output disabled‖ will be shown, i.e., no engraving output for this kind of drawings will be carried out; if both are selected, data in this color will be provided with possibility of both Outline and Carve output, pay attention that there must be closed drawings for Carve.
  • Page 46 泰智科技 Shenzhen Topwisdom Technology Co., Ltd Free speed: The move speed of laser head when the laser is off. he rang is 0.000 to Axis X,Y limit speed. Default: If selected, parameters like power intensity and speed etc. will be in accordance with what displayed on the machine.
  • Page 47 泰智科技 Shenzhen Topwisdom Technology Co., Ltd  Y_Unilateralism: Engraving from one vertical side, when move inversely ,the laser is off. It can eliminate backlash and the processing effect is good, but the processing time is longer.  Y_Bidirectional: Engraving from both vertical sides. The processing time is short.
  • Page 48: Coordinate Setting

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd  When finish setting the ReverseRepair, set the appropriate value of max power and precision. Generally, 60W CO2 laser, 53.5 Focus lens, 350DPI is recommended. The greater the precision, the longer the engraving time.
  • Page 49: Track Setting

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd There is 9 location can choose. If you set the location in upper right, the output file will be processed in the lower left side of the laser head. As shown in Fig. 4-8.
  • Page 50: Single Axis Operation

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd Select a serial number in the shape drop-down box. Then the shape with this number will be displayed in the upper right window. And the red arrow shows the start process point and the direction of cutting.
  • Page 51: Output Engrave

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd Fig. 4-10 Firstly select the com port which is the USB port described in section 3.6. Then select the axis you want to move. Set the move distance in MoveSize edit box and the move speed in Speed edit box.
  • Page 52 泰智科技 Shenzhen Topwisdom Technology Co., Ltd Parameter description: Out Rows: The rows of the output shape. Out Columns: The Columns of the output shape. By defaut, the row and column is 1,it means the shape will be processed once. Row Interval (mm): The interval size of row. The unit is mm.
  • Page 53 泰智科技 Shenzhen Topwisdom Technology Co., Ltd Translate Mode: The communication mode for download file from computer to control card. If USB mode is selected, it can select the com port in the drop-down box—corresponding to the visual serial port created in the Device Manager of the computer.
  • Page 54 泰智科技 Shenzhen Topwisdom Technology Co., Ltd they meet the requirements. This is helpful to reduce the nodes within a shape and make the not closed graph to closed graph. ClosedRepair: Set the compensated line length for compensating the process error leaded by the mechanical parts.
  • Page 55: The Equipment Management

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd OutFromFile: Download the *.out work file to control card. Save: Generate a work file from current drawing and save the work file in computer. Output: Click it and a window is shown. Doc name is assigned by the program, can be modified.
  • Page 56: Toolbar

    Open the parameter settings menu (Fig. 4-16、4-17). This software functions to make settings for the equipment parameters of Topwisdom laser engraving software. 4.2.1 Toolbar There are 3 buttons in the tool bar , respectively representing: factory settings, open file, save file and exit.
  • Page 57 Port: It’s the communication interface between the computer and the equipment, which is realized via the port, namely, the image information and the equipment parameters on the computer are transmitted to the equipment via the port. Topwisdom laser engraving software adopts USB interface or network for the connection with the computer.
  • Page 58 Clear: Besides the drop-down box option, the rest of the parameter value will be set to null, which is no parameter values. ※ Topwisdom software uses serial ports for writing and reading, therefore, once a kind of software is using a serial port, other software cannot use this serial port.
  • Page 59 泰智科技 Shenzhen Topwisdom Technology Co., Ltd Fig. 4-17 Direction Polarity: Classified into positive and negative, when the motion direction of the motor disaccords with the direction control buttons on the keyboard, you can change the direction polarity to make them consistent with each other.
  • Page 60 泰智科技 Shenzhen Topwisdom Technology Co., Ltd equipment. RealSize: The length on the effect drawing designed by the user, normally in whole numbers but not exceeding the max. travel. WishSize: The length of the track left by the engraver on the engraved material, which can be measured by measuring tools.
  • Page 61: Embroidery Import

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd Most Speed (mm/s): The max. speed allowed for single-axis movement. This value decides the max. Engraving speed and cutting speed. Stop Speed (mm/s): The speed of sudden stop during single-axis motion, i.e., the motion stops speed.
  • Page 62: Import Bitmap

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd Fig. 4-20 4.2.4 Import bitmap If have a bitmap for engraving, click on the import bitmap button in Fig. 4-20, a Import set window will be shown. If you need to change the bitmap into reseau diagram, select the NetMode check box.
  • Page 63: Curve Precision

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd 4.2.5 Curve Precision Set the curve accuracy with the software to improve the smoothness and speed of the operation, you can select general, meddle, high, very high, most high, etc.. Fig. 4-22 4.3 CAD Direct Output Software Operation Open the CAD software, show as Fig.
  • Page 64: Cad Direct Output Software Supplementary Description

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd 4.4 CAD Direct Output Software Supplementary Description 4.4.1 The Support of AutoCAD Direct Output Annotation Text Text and annotations in CAD system are normally exported as auxiliary information, therefore, in usual cases, you need not select text and annotations in the window shown in Fig.
  • Page 65 泰智科技 Shenzhen Topwisdom Technology Co., Ltd Fig. 4-25 After the steps above, the settings are completed, but please do note that when inputting text, as shown in the figure below, after the text inputting tool is selected, the menu shown in Figure Fig. 4-26 will appear when inputting text.
  • Page 66: Carving Gradient Sketch Map

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd 4.4.2 Carving Gradient Sketch Map Fig. 4-27 4.4.3 Coordinate System Fig. 4-28 Coordinate: Coordinate must match original position of the machine. On the same machine can't literally change the coordinate system Location: The position of laser head is the start position before cutting. As shown in figure below, there are 9 locations of laser head relative to the position of graphic.
  • Page 67: Supplementary Description Of Carving

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd Fig. 4-29 4.4.4 Supplementary Description of Carving AutoCAD provides the Carving output, which only needs the contour of a drawing instead of filling, which should be particularly paid attention to. Please note that for drawings drawn in AutoCAD, the Carving in direct output is carried out according to the contour, you need not to draw the drawings in the filled mode, besides, there’s no difference between intaglio and incised inscription, Fig.4-30 shows...
  • Page 68: Supplementary Description Of Software And Cad Direct Output

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd drawing graphic scan effect Fig. 4-31 drawing graphic scan effect Fig. 4-32 From what described above, we may see that for Carving out of vector graphics, filling is not needed, and there’ll not be this kind of influence between drawings in different colors, as shown in Figure Fig.
  • Page 69 泰智科技 Shenzhen Topwisdom Technology Co., Ltd software alone, Therefore, sometimes the user need to make improvements for the drawing so as to make the operation of the machine in accordance with our ideas. Some simple drawings may be connected and exported in order See the figure below: Fig.
  • Page 70 泰智科技 Shenzhen Topwisdom Technology Co., Ltd draw the figure in several sections instead of drawing it continuously, therefore, the software will create multiple effects of output (this is relevant to the order of drawing of different users), however, may be none of the effects is what you expect.
  • Page 71 泰智科技 Shenzhen Topwisdom Technology Co., Ltd between the line sections, so the order cannot the arranged. Therefore, when drawing, pay attention that the joints must be closed. No display when opening the drawing in a 3rd party engraving software, or run into a wall when using CAD for direct output.
  • Page 72: Part 5 The Operation Panel

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd Part 5 The Operation Panel 5.1 The Panel Operation and Buttons Function Introduction 5.1.1 The Panel Fig. 5-1 5.1.2 Buttons Function Introduction ―Emergency Stop‖ key: no matter what state the machine, click the key, it’ll be into reset state, then return the origin point.
  • Page 73 泰智科技 Shenzhen Topwisdom Technology Co., Ltd ―Power Light Intensity‖ Key: Set the laser powers. ―Menu‖ Key: Press the key into the main menu interface. ―File‖ Key: Into the memory file selection interface. ―U Disk‖ Key: Into the U disk file selection interface.
  • Page 74 泰智科技 Shenzhen Topwisdom Technology Co., Ltd ―Pause/Run‖ Key: press the key to pause at the working state, again press, it’ll go to running. On the Pause state, after moving the X or Y axis, touch a time, it’ll be automatically return the origin to continue working. On the Stop state, press the key, the laser head will automatically return the regression point.
  • Page 75: The Main Interface Introduction

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd 5.2 The Main Interface Introduction 5.2.1 Power Interface System Init ... Fig.5-2 The system is initializing, please wait… 5.2.2 Standby Interface After initialization, it’ll into the standby interface, show as: etwork Disconnect 2014 03 10 10 58...
  • Page 76 泰智科技 Shenzhen Topwisdom Technology Co., Ltd complete times, default power ,speed of the machine., the water protect status ,the speed of key moving, and the position of axis x and axis y. And at the bottom left of the interface, it show the machine status and the last working time.
  • Page 77: Speed Setting Interface

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd 5.2.3 Speed Setting Interface After initialization, press the ―Speed‖ key, show as: Param 1 L a y e r P a r a m 2 W o r k S p e e d m m s...
  • Page 78: Range Preview Interface

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd 参 数 Param 1 L a y e r P a r a m 1.最 小 光 强 ( % ) 2 P o w e r M i n 1 ( % ) 2.最...
  • Page 79: Single Axis Movement Interface

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd  If Laser On: Set run scale with or without laser on. Press ―Choose‖ key to set the value.  Run Speed (mm/s): The speed of running scale, unit is mm/s.  Power:When cutting the scale, it uses the system default power which is shown here.
  • Page 80: U Disk File Interface

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd Memory File Network Disconnect 2014 03 10 11 00 0 0 1 1 2 3 4 5 6 7 8 O U T 0 0 2 1 2 3 4 5 6 7 8 O U T...
  • Page 81: The Main Menu Setting

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd U Disk File Network Disconnect 2 0 1 4 0 3 1 0 1 1 0 0 0 0 1 1 2 3 4 5 6 7 8 O U T 0 0 2 1 2 3 4 5 6 7 8 O U T...
  • Page 82: File Setting

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd Main Menu Network Disconnect 2 0 1 4 0 3 1 0 1 1 0 0 Memory File Sys Info U Disk File Integrate System Test File Set Fig. 5-12 Press the ―Up/Down/Left/Right‖ key to choose the needed setting, ―Enter‖ to operate, and ―ESC‖...
  • Page 83: The Integrate Settings

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd  Save as CurSel: Once a file is finish downloading, it will be select as current file.  Save and Execute: Once a file is finish downloading it will be executed.  File Work Mode: General or Cyc. Cyc means All the Files will be executed one by one in cycle.
  • Page 84: Equipment Set

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd Laser Set 2014 03 10 11 00 1. L a s e r T y p e C O 2 2. P W M F r e q u e n c y ( H Z ) 2 0 0 0 0 3.
  • Page 85 泰智科技 Shenzhen Topwisdom Technology Co., Ltd Equipment Param 2014 03 10 11 00 1 T a b l e M o d e G e n e r a l 2 L a s e r C a r M o d e...
  • Page 86: Axis Set

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd  Because cylindrical materials with different diameter, the range and the resolution of Y axis is different. So the controller provides a reference diameter and reference resolution for convenience to calculate.  After the reference diameter and reference resolution set correctly, each time replace material, it just needs to set the ―Diameter‖...
  • Page 87 泰智科技 Shenzhen Topwisdom Technology Co., Ltd Axis Set 2 0 1 4 0 3 1 0 1 1 0 0 X Axis Y A x i s Z A x i s U A x i s V A x i s Fig.
  • Page 88 泰智科技 Shenzhen Topwisdom Technology Co., Ltd X Axis Setting 2 0 1 4 0 3 1 0 1 1 0 0 8 L i m i t P N N e g a t i v e Key Dir N e g a t i v e...
  • Page 89: Back Set

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd shorter the work time, and the stronger jitter of motion.  Jerk (mm/s3): The acceleration of the acceleration change from the minimum acceleration to upgrade to the maximum acceleration—Or the changed from the maximum acceleration reduce to minimum acceleration during slowdown..The smaller the jerk, the weaker the jitter of motion, the slower of acceleration and deceleration.
  • Page 90 泰智科技 Shenzhen Topwisdom Technology Co., Ltd Back Set 2 0 1 4 0 3 1 0 1 1 0 0 I n i t B a c k M a n u a l B a c k Fig. 5-22 ...
  • Page 91: User Set

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd Manual Back 1 X Back 2 Y Back 3. Z Back 4. U Back 5 V Back Fig. 5-24 5.4.5 User Set In the Integrate Setting interface, press ―Up/Down‖ key to select the ―User Set‖ item.
  • Page 92 泰智科技 Shenzhen Topwisdom Technology Co., Ltd User Set 2 0 1 4 0 3 1 0 1 1 0 0 5 0 0 8 F e e d i n g D e l a y m s 9 D o o r P o l a r i t y...
  • Page 93: System Information

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd  Water Protect: Enable or disable detecting the status of laser water cooling valve. ―Open‖ means detect, ―Close‖ means NOT detect. 5.5 System Information Press ―Menu‖ button into Main Menu, then select Sys. Info, press ―Enter‖ key to enter system set interface.
  • Page 94: The Password Setting

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd  X Travel: The total distances axis X has moved.  Y Travel: The total distances axis Y has moved. Stat Info 2 0 1 4 0 3 1 0 1 1 0 0...
  • Page 95: System Test

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd Password 2014 03 10 11 00 Pass Manage Time Limit Pas. Times Lock Date Out PAS Fig. 5-29 Press the ―Up, Down, Left, Right‖ key to select the needed operation.  Pass Manage: To modify the manage password.
  • Page 96 泰智科技 Shenzhen Topwisdom Technology Co., Ltd System Test 2014 03 10 11 00 IO Input IO Output Tfram Clock Flash Fig. 5-30 Press the ―Up, Down, Left, Right‖ key to select the needed operation. 1. IO Input: corresponding to the IO input low power, it'll display from Green to Red.
  • Page 97: Part 6 The Frequently Asked Question Help

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd Part 6 the Frequently Asked Question Help 6.1 Power-on Reset Question Q: the system does not reset, buttons no response, and LCD no display. A: the system reset error, the solution is: First, click the ―Emergency Stop‖ on the panel, and check the button normal.
  • Page 98: The Laser Light Question

    泰智科技 Shenzhen Topwisdom Technology Co., Ltd A: the regression point setting error. Into the ―Regression Point Setting‖ interface, set the regression point as mechanism origin point. Q: the setting of power back to origin is close, after power, X, Y still automatically moving.
  • Page 99 泰智科技 Shenzhen Topwisdom Technology Co., Ltd  Can’t read the parameters.  Transfer the file invalid. The Solutions:  Check whether the USB line is connected correctly, and the USB port is connected the PC.  Check the USB driver is installed correctly.

Table of Contents

Save PDF