New Holland L180 Repair Manual page 10

Index
ENGINE ­ Dynamic description (B.10.A ­ C.30.A.10)
ENGINE ­ General specification (B.10.A ­ D.40.A.10)
ENGINE ­ Remove (B.10.A ­ F.10.A.10)
ENGINE ­ Troubleshooting (B.10.A ­ G.40.A.10)
Information Units and Information Search
Each chapter is composed of information units. Each information unit has the ICE code shown in parentheses which
indicates the function and the type of information written in that information unit. Each information unit has a page ref­
erence within that Chapter. The information units provide a quick and easy way to find just the right piece of technical
information you are looking for.
example information unit
Information Unit ICE code
ICE code classification
Navigate to the correct information unit you are searching for by identifying the function and information type
from the ICE code.
(1) Function and (2) Information type.
•
(A) corresponds to the sections of the repair manual.
•
(B) corresponds to the chapters of the repair manual.
(C) corresponds to the type of information listed in the chapter contents, (D) Technical data, (C) Functional Data,
(G) Diagnostic or (F) Service.
(A) and (B) are also shown in the page numbering on the page footer.
THE REST OF THE CODING IS NOT LISTED IN ALPHA­NUMERIC ORDER IN THIS MANUAL.
You will find a table of contents at the beginning and end of each section and chapter.
•
You will find an alphabetical index at the end of each chapter.
By referring to (A), (B) and (C) of the coding, you can follow the contents or index (page numbers) and quickly
•
find the information you are looking for.
INTRODUCTION
POWER PRODUCTION ­ B
ENGINE
Stack valve ­ Sectional View (A.10.A.18 ­ C.10.A.30)
A 10.A
Distribution Primary
systems hydraulic
power
CRIL03J033E01
87630288 1 6/6/2007
5
Find manuals at http://best-manuals.com/search?&s=NH-87639288
18 C
Stack valve Functional
data
1
4
3
5
6
10.A.30
Sectional view