Product Description This product uses marine grade aluminum, high-strength stainless steel and high composite plastic materials. Material lighter, higher strength, anti-aging and corrosion resistance is higher. Variety of installation methods can be mounted to the right size and round tubular base on. Supports all types of protective cover, clip used in conjunction.
Bracket Assembly 1. Multifunction ball screw nut head and the multi-function clip on the fixed and confirmed firmly fixed before use. As shown: 2. Clamp“Connecting rod”onto spherical ball of “fixed ball joint” 3. Multi-function clip and then fix the assembly to the other side of Connecting rod.
Page 4
Warning: This section is casual version of the series frame, non-professional version. For road cycling tour. Very bad road conditions are not suitable for cross-country road washboard roads. Thus causing damage to the equipment the company does not undertake any responsibility! For your safety during the ride, please loosen the fixing knob on “Connecting rod”...
Bracket Installation Mounting hole diameter 10mm 1. Assemble it on the base of the reflective mirror. Remove the base from the reflective mirror. Insert the ball head bolts with crooked into the mounting hole and remount the mirror. It’s advisable to adjust the angles of the reflective mirror by increasing gaskets if the angle is not right after the screw is tightened.
Page 6
Smart wireless charging cable How to charge the phone quickly? 1. First of all, ensure that the mobile phone supports the fast charging function, the device will adaptively output the corresponding charging power according to the mobile phone (such as 10 watts, 7.5 watts, 5 watts);...