Page 2
The Thor Technologies RJ45-16 – 16 WAY is a 100/1000MB RJ45 Ethernet IMPORTANT Cat5 (AND ABOVE) 16 channel surge protector. Things that are crucial and should NOT be missed when using the RJ45-16 – 16 WAY Ethernet surge protector: It simply installs in-line using an RJ45 Cat5 (AND ABOVE) cable. ORIGINALLY INSTALLED CABLING MUST BE Ethernet Cat5 (AND ABOVE) 1.
Page 3
If the PABX /. PBX has standard RJ45 sockets then direct connection is acceptable. RJ45-16 Installation Manual...
Page 4
If the PABX /. PBX has standard RJ45 sockets then direct connection is acceptable. RJ45-16 Installation Manual...
Page 5
If connecting to Phones with RJ11/12 connectors use of an adaptor as pictured below is recommended Use either a cable RJ12 6P/4C to RJ45 8P/4C or an RJ45 8P8C Male TO RJ11 6P4C Female F/M Adapter RJ45-16 Installation Manual...
Page 6
WIRING EARTH ON RJ45 16 16WAY UNITS The EARTH wire should be as short as possible. If using the CLIPSAL 463SAS earth plug the screw, nut and washer locking the individual earth extension wire lugs must be tightened and as tight as physically possible. Each lug must be secured by an individual washer and nut.
Page 7
EARTH INSTALLATION USING CLIPSAL 463SAS RJ45-16 Installation Manual...
Page 8
EARTH INSTALLATION USING AN EXISTING RACK EARTH POINT RJ45-16 Installation Manual...
Page 9
Thor Technologies Pty Ltd reserves the right to alter or change the specifications and/or product as and when deemed necessary to keep in line with the Company policy of ongoing improvement in research, development and features of the product range.
Page 10
THOR Technologies Pty Ltd PO Box 95, Karrinyup Western Australia 6921 thortechnologies.com.au AUSTRALIAN DESIGNED AND ENGINEERED Made in China...
Need help?
Do you have a question about the Smart Series and is the answer not in the manual?
Questions and answers