Advertisement
Assembly...
5.
Make the silver button on the upper stem align at the two holes on the middle stem. Lock
the two triangle fasten screws at the bottom and affix the control box firmly.
6.
According to the desired need, the user can align the silver button on the lower stem at a group of
holes on the middle stem, and adjust the length of the aluminum stem. Wind the cable of the search coil
around the aluminum stem, moderate tight / loose, so that the cable will not dangle, sway or interfere
when metal detecting.
7.
Adjust the depth of the lower stem inserted to the middle stem. The bracket arm rest has three
position adjustments -- adjust accordingly. Release the triangle fasten screws under the bracket arm
when adjusting, Tighten the triangle fasten screws firmly when the desired height is set
www.PyleAudio.com
Advertisement
