OPTi 750/8536 Assembly & User Instructions

OPTI 7FT X 5FT Metal Football Goal
Assembly & User Instructions - Please keep for future reference

Components - Parts

Assemble Instructions

Important – Please read these instructions fully before assembly or using
These instructions contain important information which will help you get the best from your
equipment and ensure safe and correct assembly, use and maintenance.
If you need help or have damaged or missing parts, call the Customer Helpline:0345 6402020
1 Top . & Bottom curve x 4
2. Middle Straight x 2
3. Top Post Upright x 2
4. Bottom Post Upright x 2
5. Bottom End L/H x 1
Open all packaging and organise all straight and curved poles into numbered groups.
Each pole will have a number on it (1-9) matching the parts list above.
To connect the poles together, slide the
smaller connecting end inside the
corresponding pole end. Some poles will have
a connecting button to lock poles together.
Simply press this button down, while sliding it
inside a connecting pole, as shown.
Note: If this joint feels tight to assemble a little
washing up liquid on the small connecting end
will help slide together.
Follow the numbered diagram below and
assemble top curve (1) to middle straight (2)
to complete to top frame.
IMPORTANT: Attach the net at this
point. As you build each part of the
frame, you will need to thread the
loops at the edge of the net over
each part of the frame poles. The
end result should be the net (B)
hangs from the top bar and down to
the back oor frame. fl
750/8536
6 Bottom End R/H x 1 .
7 Top Back Curve x 2 .
8 Rear Connector x 2 .
9 Bottom Back Curve x 2 .
Issue 1 9/26/16