Subscribe to Our Youtube Channel
Related Manuals for Colormetrics P1300
Summary of Contents for Colormetrics P1300
- Page 1 P1300 User Manual Version 1.0 Errors excepted; subject to change www.colormetrics.info www.colormetrics.info Colormetrics P1300...
- Page 2 COPYRIGHT Copyright 2018 Colormetrics All Rights Reserved. This manual, software and firmware described in it are copyrighted by their respective owners and protected under the laws of the Universal Copyright Convention. You may not reproduce, transmit, transcribe, store in a retrieval system, or translate into any language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, biological, molecular,m manual, or otherwise, any part of this publication without the express written permission of the publisher.
- Page 3 Dispose used batteries according to the manufacture’s instructions. Do not remove the cover, and ensure no user serviceable components are inside. Take the unit to the service center for service and repair. www.colormetrics.info Colormetrics P1300...
- Page 4 European Union. This label is applied to various products to indicate that the product is not to be thrown away, but rather reclaimed upon end of life per this Directive. Colormetrics P1300 www.colormetrics.info...
-
Page 5: Table Of Contents
6-2 Install framework 4.0 6-3 VFD 7. TOUCH UTILITY SETUP 8. BIOS/UTILITY SETUP 7-1 Advanced 7-1-1 Boot Configuration 7-1-2 Audio Configuration 7-1-3 Video Configuration 7-1-4 SATA Configuration 7-2 Security 7-3 Power 7-4 Boot 7-5 Exit 8. LCD SURFACE CLEANING www.colormetrics.info Colormetrics P1300... -
Page 6: Packing List
Single MSR 8" or 10.4" 2 Display b. VFD c. 8” or 10.4” 2 Display i-button d. i-button Barcode Scanner 1D / 2D a. MSR b. VFD c. 8”, 9.7” or 10.4” 2 Display d. i-Button Colormetrics P1300 www.colormetrics.info... -
Page 7: System View
2-1 Rear View ☆ Please make sure 19V DC plug in the right direction before plugging in DC jack. Please make sure the 19V DC is plugged in the right direction before plugging in DC jack. 2-2 Back View www.colormetrics.info Colormetrics P1300... -
Page 8: Specification
-4° to 140° F (-20° to 60° C) Relative Humidity 20% to 80% non-condensing Dimension (W x D x H) mm 364 x 229 x 334 Certifications CE / FCC / LVD Protection IP64 on front bezel Colormetrics P1300 www.colormetrics.info... -
Page 9: Internal Layout
2-5 Internal Layout 2-4 Internal Layout M/B PCBA M.2 E Key SATA III MSR/iButton MSR/iButton Speaker DDR4 Socket Power button Power LED DC in 19V RJ45 USB 2.0 USB3.0 RJ11 COM1 COM2 COM3 USB 3.0 www.colormetrics.info Colormetrics P1300... -
Page 10: Pin Definition
DDI2_DP_TX1_DN DDI2_DP_TX1_DP DDI2_DP_TX0_DN DDI2_DP_TX0_DP BL_Enable BL PWM DIM SOC_EDP1_AUX_P SOC_EDP1_AUX_N U3Rxp1 +12V +V3.3V +12V +V3.3V +12V +12V 2. SATA1: SATA Pin Definition Definition Definition SATA_TX0_P SATA_TX0_N SATA_RX0_N SATA_RX0_P 3. SW1: Power On/Off connector Pin Definition Definition Power-ON# Colormetrics P1300 www.colormetrics.info... - Page 11 4. CN2: Touch panel connector Pin Definition Definition USB D- USB D+ 5. USB1/USB2: Sideward MSR connector Pin Definition Definition 6. CN1: VFD connector Pin Definition Definition DSR# USB D- USB D+ RTS# CTS# DTR# www.colormetrics.info Colormetrics P1300...
-
Page 12: Rear I/O Interface
1. DC Jack Pin Definition Definition +19V Ground +19V 2. 2-Layer USB2.0 connector Pin Definition Definition Definition 3. 2-Layer USB3.0+2.0 connector Pin Definition Definition Definition 4. LAN: RJ45 Pin Definition Definition MDI0A+ MDI0A- MDI1A+ MDI1A- MDI2A+ MDI2A- MDI3A+ MDI3A- Colormetrics P1300 www.colormetrics.info... - Page 13 5. COM connector Pin Definition Definition DCD1# DTR# DSR# RTS# CTS# 5V/12V/Ring# Powered COM 5V/ 12V selected by jumper 6. RJ11 (Cash Drawer) connector Pin Definition Definition SOUT6_RJ11 RI#6 +24V www.colormetrics.info Colormetrics P1300...
- Page 14 7. LED1: Power Button Pin Definition Definition +5V standby GPIO 8. SPK1: Int. Speaker Pin Definition Definition Out+ Out- 9. Cash Drawer connector Pin Definition Definition SOUT6_RJ11 RI#6 +24V Colormetrics P1300 www.colormetrics.info...
-
Page 15: System Assembly & Disassembly
1. Dis-fasten 2 screws. 2. Pull out the hard drive case in an outward direction to remove it from the system. 3. Install the hard drive in the hard drive case and fasten 4 hard drive case screws. www.colormetrics.info Colormetrics P1300... -
Page 16: Ram
5-2. RAM Dis-fasten 13 screws and remove the back cover. Insert the RAM into the RAM slot. Colormetrics P1300 www.colormetrics.info... -
Page 17: Msr / I-Button / Rfid
1. The MSR/i-Button easily install on the side of the LCD Touch Screen’s USB 2.0 connector. 2. Insert the USB connector on the MSR/i-Button into the side USB port 3. Secure the module with the two screws onto the system. www.colormetrics.info Colormetrics P1300... -
Page 18: Vfd / 8"/ 9.7" 2Nd Display
(note: display connector can only be connected to one device at a time). 3. Install VFD with 2 screws / Install 8”or 9.7” 2nd display with 2 screws. 4. VFD/2 display installation is complete as shown in the picture Colormetrics P1300 www.colormetrics.info... -
Page 19: 2D Barcode Scanner
5-5. 1D/2D Barcode Scanner 1. Install the barcode scanner with bracket attached by tightening the 2 screws 2. Plug the barcode scanner Type-A Male USB cable into a USB port www.colormetrics.info Colormetrics P1300... -
Page 20: Device Driver Installation
After success device connection each supported command will get its response, e.g. Get Version command should response with the device HW/FW version, for all command set supported please reference its programming guide. There are two command/response windows can be used (see block1 & 2). Colormetrics P1300 www.colormetrics.info... - Page 21 “Load From File”: Load the previous setting configuration file from storage. “Save To File”: Save the current screen setting to file in storage. “Get Configuration Word”: Get current setting in the device connected. “Set Configuration Word”: Set current setting on the screen to the device connected. www.colormetrics.info Colormetrics P1300...
- Page 22 16 parameter areas(see below) are used for four functions, each function related area should be setup correctly and press Set Configure Word button before operation. MSR function areas: 1,2,5,6,9,11,12,13 i-Button function areas: 2,3,5,7,10,11,14 RFID function areas: 2,4,5,8,11,15 Chip card function areas: 16 Colormetrics P1300 www.colormetrics.info...
- Page 23 Area 3 i-Button Enable: If enabled, i-Button key ID may response when key attached or removed. Area 5 Beep Enable: If enabled, the beeper will activate to indicate the operation result. www.colormetrics.info Colormetrics P1300...
- Page 24 Define Track 3 Start sentinel byte, default is “+”. Tracks End Sentinel: Define all Tracks End sentinel byte, default is “?”. Tracks Separator: Define the insertion byte between each track data returned. Tracks Terminator: Define the appending byte after the last track data returned. Colormetrics P1300 www.colormetrics.info...
- Page 25 Select RFID ID response port right after tag attached or removed. Head/Tail Message: Message prefix and suffix to tag data returned. Each Head/Tail accepts10 bytes max. long. Invisible code: Enter keyboard control code. Area 16 ICC Response Port: Select chip card auto. ATR response port, www.colormetrics.info Colormetrics P1300...
-
Page 26: Install Framework
6-2. Install framework 4.0 1. Double-click to install. 2. Select “I have read and accept the license terms. And click Install.. Colormetrics P1300 www.colormetrics.info... - Page 27 3. Click Finish. www.colormetrics.info Colormetrics P1300...
-
Page 28: Vfd
6-3. VFD 1. Power on VFD and waiting test page of EEPROM test, Baud rate and Command page. Set up the customer display by " VFDset.exe” 2. Setup VFDset.exe software. Colormetrics P1300 www.colormetrics.info... - Page 29 VFD module (Note: You may check it when power on VFD module), then click “Open COM” button. 4. “Get Setting from VFD” button to get all the settings from Clientron and it’ll refresh the “VFDset.exe” software. 5. Select “Character Type”/ “Command Mode”/ “Baud Rate Select”/ “pass thru Mode”. www.colormetrics.info Colormetrics P1300...
- Page 30 You can type the character by keyboard (0x20h ~ 0x7Fh), if you press clear icon, it will clear the all Message characters on AP. b. Hex mode Hex mode can define the character from 0x20h to0xFFh，the range 0x80~0XFF which depends on the code page table. Colormetrics P1300 www.colormetrics.info...
- Page 31 “Download O.K! Please restart!” message popped up. Please restart display for enable new setting 9. Click “Save” button To save user’s setting in file; for example, below picture to save file name as “GOODLUCK” file set for Welcome Message. www.colormetrics.info Colormetrics P1300...
- Page 32 10. Click “Load” button After saving, you must restart the utility here. Then load your setting rename-GOODLUCK.vfd. Colormetrics P1300 www.colormetrics.info...
-
Page 33: Touch Utility Setup
TOUCH UTILITY SETUP 6-4. Touch Utility setup 1. Double-click to install. 2. Select Next than install 3. Reset your system. www.colormetrics.info Colormetrics P1300... - Page 34 4. Double-click to icon. 5. Open touch utility., at tag of setting, can chose Digitizer or Mouse mode. Colormetrics P1300 www.colormetrics.info...
-
Page 35: Bios/Utility Setup
BIOS/Utility setup BIOS/Utility setup BIOS / UTILITY SETUP 1. Press <DEL > key to enter SETUP CMOS UTILITY when system boot up. 2. Press <ENTER >over SCU button to enter the utility. www.colormetrics.info Colormetrics P1300... - Page 36 Windows OS, these items are automatically updated whenever you make changes to the Windows Date and Time Properties utility. WARNING! Setting the wrong values in the sections below may cause the system to malfunction. Make sure that the settings made are compatible with the hardware. Colormetrics P1300 www.colormetrics.info...
-
Page 37: Advanced
7-1. Advanced Use the Advanced menu to configure the system for basic operation through the following sub-menus: www.colormetrics.info Colormetrics P1300... -
Page 38: Boot Configuration
7-1-1. Boot Configuration Use the Boot Configuration menu to select power-on state for Numlock. Colormetrics P1300 www.colormetrics.info... -
Page 39: Audio Configuration
7-1-2. Audio Configuration Use the Audio Configuration menu to read Audio configuration information and configure the Audio settings www.colormetrics.info Colormetrics P1300... -
Page 40: Video Configuration
7-1-3. Video Configuration Use the Video Configuration menu to read Video configuration information and configure the Video settings Colormetrics P1300 www.colormetrics.info... -
Page 41: Sata Configuration
7-1-4. SATA Configuration Use the SATA Configuration menu to read SATA configuration information and configure the SATA settings www.colormetrics.info Colormetrics P1300... -
Page 42: Security
7-2. Security Use the Security menu to install or change the password Colormetrics P1300 www.colormetrics.info... -
Page 43: Power
Enable or disable system power on automatically after AC power restored Wake on LAN Enable or disable system wake by onboard LAN chip LVDS Firmware update This item allows you to enable or disable LVDS Firmware update www.colormetrics.info Colormetrics P1300... -
Page 44: Boot
7-4. Boot Use the Boot menu to select type to Dual type, Legacy type or UEFI type. Colormetrics P1300 www.colormetrics.info... -
Page 45: Exit
7-5. Exit Use the Save & Exit menu to load default BIOS values, optimal failsafe values or to save configuration changes. www.colormetrics.info Colormetrics P1300... -
Page 46: Lcd Surface Cleaning
3. What types of cleaners are acceptable? Water ☆ Vinegar (mixed with water) ☆ Isopropyl Alcohol ☆ NOTICE: The following cleaners are unacceptable: ☆ Acetone ☆ Ethyl alcohol ☆ Ethyl acid ☆ Ammonia ☆ Methyl chloride Colormetrics P1300 www.colormetrics.info...
Need help?
Do you have a question about the P1300 and is the answer not in the manual?
Questions and answers