Table of Contents
Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
GETTING STARTED:
Tools AND fasteners you may need (not included)
The tools you will need for installing your shade will vary, depending on
the installation surface and mounting bracket type. Tools typically used for
installation include:
Metal Tape
Measure
Drill with bits
(1/4 hex driver & drill bit)
ZEBRA
Screwdrivers
(both flat and Phillips head)
Level
(to be used for outside mount)
Pencil
Ladder
1
Advertisement
Table of Contents
Summary of Contents for Diy Blinds Zebra
- Page 1 ZEBRA INSTALLATION INSTRUCTIONS GETTING STARTED: Tools AND fasteners you may need (not included) The tools you will need for installing your shade will vary, depending on the installation surface and mounting bracket type. Tools typically used for installation include: Metal Tape...
- Page 2 ZEBRA INSTALLATION INSTRUCTIONS PLEASE FOLLOW THESE INSTALLATION INSTRUCTIONS You will need a pencil, tape measure, drill, screwdriver, pliers, and appropriate fasteners. Step 1: MOUNTING HARDWARE INCLUDED PART QUANTITY 2 for shades up to 45” wide Mounting Brackets 3 for shades up to 72” wide 2 for shades up to 45”...
- Page 3 ZEBRA INSTALLATION INSTRUCTIONS To adjust head rail extension, remove the shade from the mounting brackets by pressing on the plastic tabs at the front of each bracket. Then loosen the nut and bolt, and move the mounting brackets forward or backward as preferred.
- Page 4 ZEBRA INSTALLATION INSTRUCTIONS Step 5: USE THE CONTROL CORD TO OPERATE SHADE Pulling gently on the cord in one direction raises the shade; pulling it in the other direction lowers it. On shades where the fabric rolls against the window, the front cord does the raising. On shades where...
Need help?
Do you have a question about the Zebra and is the answer not in the manual?
Questions and answers