TS 500 User Guide Table of Contents 1 Introduction ........................3 1.1 Safety Instructions ..................... 3 2 Setting Up Your Thermostat ..................3 2.1 Home Screen Information ..................3 2.2 Using the Setup Wizard .................... 4 2.3 Manual Setup ......................4 2.3.1 Control Type .....................
TS 500 User Guide INTRODUCTION TS 500 is an electronic thermostat specially designed for, but not limited to, floor heating systems. The thermostat has the following features: • Touchscreen display in colour with easy-to-follow menu-driven system. • Settings with timer that enables energy-saving for pre-set desired temperatures at specific times (i.e.
TS 500 User Guide 2.2 Using the Setup Wizard The Setup Wizard will give you step-by-step instructions. Below are a few tips to keep in mind when setting up your thermostat with the Setup Wizard. Return to home Set up time page by using home icon Press (and hold) arrows to...
TS 500 User Guide 2.3.2 Minimum Temperature How to set the minimum floor temperature above the specified lower level. 1 Touch the ther- 3 Press Min. Installation Setup mostat display to Temperature. activate it, then About Control Type Air Sensor press Menu.
2.3.7 Sensor Probe The TS 500 comes with the Devex Systems 15 kOhm sensor, but it can be used with other sensors, including 10 kOhm and 12 kOhm. It is important to select the right sensor to get the right temperature reading.
TS 500 User Guide 2.4.2 Turning the Heat ON and Off Manually When the timer is switched off, an ON/OFF toggle is shown on the home page. You can use this toggle to manually turn on and off the heating. The temperature can also be changed manually by using the arrows.
TS 500 User Guide 2.5 Timer Setup The timer feature helps you programming an unlimited number of Heating Periods where the ther- mostat will bring the temperature up the heating temperature, as well as Setback Periods when the thermostat will bring down the temperature to the setback temperature. 2.5.1 Heating and Setback Settings The heating temperature is the desired temperature when you want your heating system to be on.
TS 500 User Guide 2.5.3.1 Create a Heating Period When in doubt, refer to the help button guide you through the setup. 2 Press add to create a new 1 To create a Heating Heating Period and adjust Period press the by using the arrows up and desired day (i.e.
TS 500 User Guide FEATURES 3.1 Holiday Mode 3.1.1 Suspend Normal Temperature Settings 1 Touch the ther- 5 Press Setback Menu Temperatures mostat display Temperature and to activate it, use the arrows to General Settings Heating Temperature 22.0˚ then press set the temperature Special Features Setback Temperature...
TS 500 User Guide 3.2.2 Unlock the Screen 3 Press Screen Lock. 1 Touch the Menu Password thermostat Press the display display to again and you will General Settings activate it, then be prompted for a Special Features press Menu. password.
TS 500 User Guide 4.2 Error Message The error message will appear on the left of the screen. To access the error details, press the error icon. The problem will be explain and the following solutions should be initiated. Error message Problem Solution Internal fault.
Page 13
Devex Systems specialises in heating solutions for new or existing buildings in residential, commercial and industrial environments. For more information, please contact us at: 1800 636 091 or info@devexsystems.com.au www.devexsystems.com.au NEW SOUTH WALES TASMANIA VICTORIA 5/83 Bassett Street...
Need help?
Do you have a question about the Xthermostat TS 500 and is the answer not in the manual?
Questions and answers