Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for Clever AirPro X1
- Page 1 1 PERSON KAYAK INSTRUCTIONS...
-
Page 3: Table Of Contents
CONTENTS Safety Instructions Parts list How to attach the stabilising fins How to assemble the Kayak paddle Setting up your Airpro X1 Kayak ® How to fit the inflatable backrest Care / Repair / Disposal Returns Warranty Use / Contact Us SAFETY INSTRUCTIONS - READ CAREFULLY! 1. Maximum operating pressure: 0.05 bar (0.725psi). -
Page 4: Parts List
PARTS LIST Please check all parts are present in your box before first use. Airpro X1 Inflatable Kayak Part List. ® Part No. Description Quantity Airpro ® X1 Inflatable Kayak Cargo Net (Installed) Inflatable Back Rest & Tie Cord Clip on Stabilising Fins Paddle Fins Paddle Poles Paddle Grips... -
Page 5: How To Attach The Stabilising Fins
HOW TO ATTACH THE STABILISING FINS Note: We recommend installing the fins before inflating the Kayak. Fitting the stabilising fins Turn the Kayak (A) over and lay top down on a flat even surface, making sure it is clear of any sharp objects. Locate the fin locking positions fixed to the underside of the hull (2/3). (4) A lign the fin (1) as shown so the arc faces toward the front of the Kayak. (5) C lip one of the fins into the slotted fitting of the front locking clip. (6) F ix the back of the fin into the rear locking slot. -
Page 6: How To Assemble The Kayak Paddle
HOW TO ASSEMBLE THE KAYAK PADDLE Paddles Slide locking screw (H) over end of pole (F). Push paddle fin (E) onto end of pole (F) and tighten, screw (H). Handles Slide locking screw (H) over opposite end of paddle pole (F), push fit paddle grip (G) and tighten locking screw (H). Repeat these steps to assemble the opposite end of the paddle. Slide on x2 locking screws (H) on to the remaining paddle pole (F), push fit into open end of paddle grip (G) and tighten. Airpro X1 Kayak Features ® The Airpro X1 backrest will be fixed ® to the eyelet (4) Once assembled the paddle can be stored in the clips on the side of the inflated Kayak for easy access (5). The Airpro ® X1 has 3x inflation valves for the base (1), Sides (2) & Top (3). The Airpro X1 is equipped with a ®... -
Page 7: Setting Up Your Airpro ® X1 Kayak
SETTING UP YOUR AIRPRO X1 KAYAK ® Inflating the Kayak • Maximum operating pressure: 0.05 bar (0.725psi). • Avoid excessive inflation of the air chambers to prevent danger of the material stretching or the seams tearing. • Please use the foot pump provided with this purchase. Use of a high pressure pump may damage the product and void your warranty. • Do not use a compressor or a compressed air bottle to inflate the article as this can cause over inflation. • Completely inflate all of the air chambers. • The PVC material will stretch a little following initial inflation and will never return to its original size. • Pump up the air chambers so that they feel firm to the touch and no wrinkles can be seen in the material. Press on each air chamber with your thumb – the chambers should be firm to the touch. Note: We recommend inflating the Kayak in the order listed below. Lay out the Kayak (A) on a flat even surface, making sure it is clear of any sharp objects. 1. Inflate base of the Kayak using the clear inflation valve. 2. Inflate the Kayak sides using the rapid inflate valve. 3. Inflate the Kayak top using the rapid inflate valve. Using the Foot Pump Use the foot pump (H) to inflate Push the inflation hose (J) into the Firmly push the end of the hose (H) the Kayak (A) until firm, ‘inflate’ valve on the foot pump (I) into the desired inflation valve. being careful not to over inflate. -
Page 8: How To Fit The Inflatable Backrest
HOW TO FIT THE INFLATABLE BACKREST Inflating the backrest Lay out the Kayak backrest (C) on a flat even surface, making sure it is clear of any sharp objects. Locate the inflation valve (1) on the lower rear of the backrest (C) and remove the valve cap. Inflate the Kayak backrest using the foot pump as directed. Fitting the Backrest Insert the backrest (C) into the rear of the Kayak seating area with the backrest “arms” against the Kayak floor. Locate the eyelet on the rear of the backrest (2) and corresponding one on the Kayak top (3). Using the backrest tie cord, loop it through both eyelets and securely tie a knot to secure the backrest. -
Page 9: Care / Repair / Disposal
CARE / REPAIR / DISPOSAL CARE / MAINTENANCE / STORAGE Only use care products that do not contain traces of acids or petroleum and never use silicone-based products. • C lean your Kayak thoroughly after every use with fresh water and mild soap to remove salt crystals, sandy granules and other small dirt particles. Leave it to dry completely. • D eflate the parts of the Kayak by removing the stoppers from the relevant valves and remove all of the air. • Lay both of the upper side pipes into the inside of the Kayak and fold them together carefully. • S tore your Kayak in a clean and dry place away from direct sunlight and somewhere where there are no great temperature fluctuations. Pay attention to the fact, that the Kayak is not wrinkled but lays flat, and keep well out of the reach of rodents. • All inflatables are sensitive to cold. The Kayak should never be unfolded and inflated at a temperature under 10°C! • If the atmospheric pressure increases under the blazing sun, this must be compensated by releasing some air from the craft. • T ry to ensure that the Kayak (particularly when inflated) does not come into contact with stones, gravel or sharp objects, and that it is not dragged or pulled along the ground because this can damage the Kayak‘s skin. • Only insert suitable pump adaptors into the valve. The wrong type of pump adaptor can damage the valve. REPAIRING YOUR KAYAK You should not attempt to repair large damaged sections by yourself. You can repair small areas with the enclosed repair kit. -
Page 10: Returns
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOUR KAYAK? FOLLOW THE BELOW INSTRUCTIONS: • Purchased from a UK retailer: If you have purchased an Airpro Kayak from a UK retailer and have ® simply changed your mind, follow the retailers instructions for returns. This will normally require proof of purchase. • Purchased from Clever Company: If you have purchased directly from our website, then please contact us and we will email you instructions for the return of the product. Contact can be made by email or telephone as detailed in the ‘Warranty Claims’ section. When posting your items back to us, it’s important you clearly mark your parcel with your order number and full name. Ship your unused product, in its original packaging, to the address identified in our email. Again, we recommend that you keep your receipt or order number in a safe place, as you will need it as proof of purchase in the event of any after-sales query. POINTS TO NOTE: • U nder the Distance Selling Regulations, as a consumer you have the right to cancel your order... -
Page 11: Warranty
WARRANTY This warranty relates to all Airpro Kayaks bought in the UK and covers the following areas: ® • 6 months from the date of purchase This warranty is not transferable if the goods are resold after the original purchase. Your Airpro Kayak is designed and manufactured for domestic use only. The Airpro Kayak Warranty ® ® does not extend to any commercial businesses operating in the rental of Kayaks. REGISTERING YOUR WARRANTY To register your warranty, visit clevercompany.com and complete the form within 28 days of purchase. The warranty will start from the date of purchase which must be verified by proof of purchase. For up-to-date troubleshooting advice, technical information and FAQs please visit our online help centre at clevercompany.com. WARRANTY CLAIMS Before making a claim, we may be able to answer your query to common questions, simply visit clevercompany.com for further information. If the FAQs don’t solve the issue and you need to make a claim, please visit our website under the warranty section for further instructions. Alternatively, please contact our dedicated Aftersales Team by email at: support@clevercompany.com - we will endeavour to answer all email messages within 48 hours. If you need to make immediate contact our Aftersales Team are available on +44 (0) 800 0323 313. -
Page 12: Use / Contact Us
• Never leave your unoccupied Kayak on the water. It can be swept away faster than you can swim after it. • Always carry the paddle with you when using the Kayak otherwise you will not be able to manoeuvre it. • Do not attempt to make any technical changes to your Kayak. Changes of any kind endanger the operation of this device. • Never use your Kayak under the influence of alcohol, drugs or medicinal products. • N ever overestimate your own strength and divide your muscular strength with the paddle in such a way that the distance you have paddled away from the shore can be easily paddled back again. Stay in protected coastal areas, no more than 300m away, and pay attention to varying winds and currents which can complicate your movement. For General Enquiries, Returns, Spare Parts, Repairs Contact us on freephone: +44 (0) 800 0323 313 or visit: clevercompany.com Clever Company: Oldgate, St.Michael’s Industrial Estate, Widnes, Cheshire, WA8 8TL...
Need help?
Do you have a question about the AirPro X1 and is the answer not in the manual?
Questions and answers