Summary of Contents for Oxygen PARIS 240MM RB Series
- Page 1 OXYGEN AUTOMATION TECHNICAL INSTALLATION MANUAL HYDRAULIC GATE OPERATOR PARIS 240MM RB* PARIS 240MM SB* RB – ROUND BRACKET SB – SQUARED BRACKET...
- Page 2 / or be a source of danger. 17) Oxygen Automation accepts no responsibility regarding safety and correct operation in case of 6) Oxygen Automation disclaims all liability use of components not Norton Group production.
-
Page 3: Front Bracket
www.oxygenautomation.com PARIS 240 SB – PARIS 240 RB These instructions are valid for the following models: • PARIS 240-SB R\WOL - PARIS 240-SB BA\OL – PARIS 240-SB BC\CL - PARIS 240-SB BAC\OCL • PARIS 240-RB R\WOL - PARIS 240-RB BA\OL – PARIS 240-RB BC\CL - PARIS 240-RB BAC\OCL The hydraulic actuators for swing gates PARIS 240-RB and PARIS 240-SB consist of an enbloc composed of an electric pump and a hydraulic piston which transmits motion to the gate. -
Page 4: Technical Data
www.oxygenautomation.com DESCRIPTION PARIS 240 SB PARIS 240 RB TECHNICAL DATA PARIS PARIS PARIS PARIS DATI TECNICI - DATA SHEETS - FICHES TECHNIQUES - DATOS TÉCNICOS 240- R\WOL 240- BA\OL 240- BC\CL 240-BAC\OCL 230 Vac 230 Vac 230 Vac 230 Vac Tensione alimentazione / Power supply / Tension alimentation / Tensione de alimentación 50/60 Hz 50/60 Hz... - Page 5 www.oxygenautomation.com ELECTRIC STANDAD WIRING LAYOUT PARIS PRELIMINARY CHECKS GATE To ensure correct operation, the gate must have the following qualifications: - Robust and rigid structure of the doors; - The movement of the leaves must be regular and uniform but also devoid of friction during travel; - The hinges must be in good condition;...
- Page 6 www.oxygenautomation.com FIXING REAR SUPPORT PARIS 240 RB – PARIS 240 SB Fig.1 Fig.2 fig. 2.1 In the case that the size of the pillar or the position of the Hinge (D share) does not allow to contain the A in desidered measure, you must make a niche on pillar (Fig. 2.1). Dimension A must always be greater than the proportion E.
- Page 7 www.oxygenautomation.com FIXING FRONT SUPPORT PARIS 240MM SB All rights reserved Pag. 7...
- Page 8 www.oxygenautomation.com FIXING FRONT SUPPORT PARIS 240MM RB PARIS 240 RB PARIS 240 SB FIXING ROD COVER All rights reserved Pag. 8...
-
Page 9: Final Operations
www.oxygenautomation.com PARIS 240 SB – PARIS 240 RB CONTROL SYSTEM ANTI CRUSHING - Reseal the release unit device; - FINAL OPERATIONS - AUTOMATED TEST - Remove the vent screw (Fig. 9). ANTI-CRUSHING SYSTEM ADJUSTMENT (Figure 8) AUTOMATED TEST The hydraulic actuator BATHY is equipped with an After installation, proceed with care to the anti-crushing security that limits the actuator functional test automation and of all accessories... -
Page 10: Troubleshooting
Periodically check the correct adjustment anti-crushing safety (force control valves) and the efficiency of the release system. REPAIR Any Automatic System repairs must be performed by qualified staff, possibly authorized Oxygen Automation. Use original spare parts provided by Oxygen Automation. -
Page 11: General Safety
www.oxygenautomation.com END USER INSTRUCTION MANUAL HYDRAULIC ACTUATORS FOR SWING GATE PARIS 240 RB AND PARIS 240 SB Read the instructions carefully before using the product and store them for future use GENERAL SAFETY The hydraulic operator PARIS, when properly installed and used, guarantees a high degree of safety. Some simple rules on behavior can prevent accidental trouble: - Do not pass through the leaves while they are moving. - Page 12 (DIRECTIVE 98/37 CEE) ITALY and Distributed in EUROPEAN Manufactured under CE regulation and directive in UNION and OVERSEAS by OXYGEN AUTOMATION Srl, via Marzabotto, 40133 Bologna ITALIA Declares: That hydraulic operators for swings gates mod. PARIS 240 RB and PARIS 240 SB •...
Need help?
Do you have a question about the PARIS 240MM RB Series and is the answer not in the manual?
Questions and answers