Table of Contents
Advertisement
When you enter the
Card Setup
prompted for the following information: Your PIN; the
Name of your calling card; the Access number; the
Dialing delay; Code first or Number first; Verification
number; and Dialing delay again.
Set Calling Cards
You can select which calling card to use for a particular
call. You can select a specific calling card by pressing your
joystick up or down until the calling card you want to
use is highlighted. Press the left softkey to choose the
highlighted selection.
Note! Only cards that have been set up will appear as
options for Default card.
Making a Calling Card Call
1 Enter or recall the phone number you want to call.
2 Press the left softkey. The calling card access
number is shown in the display.
3 Release the key after the number has been displayed.
If you are using stops between numbers, you must press
the left softkey to send the next sequence of numbers. If
you use pauses, the numbers are sent automatically after
the specified length of time chosen for the dialing delay.
submenu, you are
For more information on Stops and Pauses, see "Stop and
Pause Dialing" on page 40.
Options
You can edit phonebook positions, change phonebook
entry sort order, set long press functionality, ask to save
confirmation, or delete all phonebook entries.
Edit Positions
You can change position numbers associated with all of
the entries you have in your phonebook for easier access
to speed dial positions.
Note! If you synchronize your computer's contact list with
your phone's contact list, the position numbers in
your phone's contact list will be overwritten.
Sort Order
You can choose whether you want your phonebook
entries searched by first name or last name.
Long Press
You can specify the outcome of a "press and hold" on a
digit key. The options are
and
.
Off
Using Menus
,
SuperSpd Dial
Phb. Shortcut
,
23
Advertisement
Table of Contents
Troubleshooting
