Troubleshooting; Replacement Parts - Powerhorse 52313 Owner's Manual

Use the table below to troubleshoot problems before contacting service personnel or your local
dealer. If the problem continues after troubleshooting, call your local dealer for assistance.
Failure
Switch
Fuel
Oil Level
Motor will not
start
Spark Plug
Carburetor
Fuel
Motor stops Fuel Cock
Air Filter
Air Filter
Gas motor lacks
power
Spark Plug
Belt
Insufficient
vibration
Motor Speed
Machine is not
Plate Underside
moving freely

For replacement parts and technical questions, please call Customer Service at 1-800-222-5381.

Not all product components are available for replacement. The illustrations provided are a
convenient reference to the location and position of parts in the assembly sequence.

When ordering parts, the following will be required: model number, serial number/lot date code,
description, and reference number.

The distributor reserves the rights to make design changes and/or improvements to product lines
and manuals without notice.

Troubleshooting

Possible Cause

Replacement Parts

Page 20 of 22
Remedial Measure
Check the ON/OFF switch to ensure
that it is switched ON.
Check the fuel supply.
If a motor is fitted, check the
crankcase oil level as an oil sensor
device is fitted to the motor which
prevents starting and stops the motor
when the oil level is low.
Ensure the spark plug ignition lead is
connected.
Check the carburetor jet and bowl to
ensure they are clean.
Check the fuel supply.
Check that the fuel cock is turned on.
Check the condition of the air filter.
Check the condition of the air filter.
Check the condition of the spark plug.
Check for a slipping or a missing belt.
Check that the motor governed speed
is 3,500 r/min.
Check the underside of the plate for
material build-up.