Advertisement
Quick Links
INSTRUCTION MANUAL
INSTRUCTION MANUAL
HUSH endura
(FOR PROFESSIONAL USE ONLY)
DO NOT USE EQUIPMENT BEFORE READING THIS MANUAL
(FOR PROFESSIONAL USE ONLY)
DO NOT USE EQUIPMENT BEFORE READING THIS MANUAL
(Suitable for up to 100 sprays per day)
Non-continuous use - up to 30 minutes use
The Hush Sprinter™ sound level is: 80db
DO NOT USE EQUIPMENT BEFORE READING THIS MANUAL
DO NOT USE EQUIPMENT BEFORE READING THIS MANUAL
This manual contains important warnings and instructions.
Please read these instructions carefully and keep for your reference.
This manual contains important warnings and instructions.
DO NOT USE EQUIPMENT BEFORE READING THIS MANUAL
Please fill out the warranty card at the back to obtain warranty.
Please read these instructions carefully and keep for your reference.
This manual contains important warnings and instructions.
©2017 Mediterranean Tan Pty Ltd
©2012 Solaire Pty Ltd
Please read these instructions carefully and keep for your reference.
Unit 5, 32 Essington Street, Grovedale, 3216, Australia.
Unit 5, 32 Essington Street, Grovedale, 3216 email: info@solaire.com.au
email: info@mtwb.com.au
©2012 Solaire Pty Ltd
International: +61 (3) 5245 8367
Ph: 1300 650 079 www.solaire.com.au
Unit 5, 32 Essington Street, Grovedale, 3216 email: info@solaire.com.au
Ph: 1300 650 079 www.solaire.com.au
SPRINTER
T
ANNING SYSTEM
T
ANNING SYSTEM
www.mtwb.com.au
1
™
TM
Advertisement
Related Manuals for Mediterranean Tan HUSH SPRINTER
Summary of Contents for Mediterranean Tan HUSH SPRINTER
- Page 1 DO NOT USE EQUIPMENT BEFORE READING THIS MANUAL (Suitable for up to 100 sprays per day) Non-continuous use - up to 30 minutes use The Hush Sprinter™ sound level is: 80db DO NOT USE EQUIPMENT BEFORE READING THIS MANUAL DO NOT USE EQUIPMENT BEFORE READING THIS MANUAL This manual contains important warnings and instructions.
-
Page 2: Table Of Contents
Table of Contents 1. General Safety Information: ......................2. Set up and operate your Hush Sprinter™ Spray Tan System: ..........3. Prepare the Hush Optimiser™ Spray Gun ..................4. Adjusting the Hush Optimiser™ Spray Gun ................. 5. Spraying ............................6. Maintenance .......................... - Page 3 Congratulations on purchasing the Hush Sprinter™ tanning system. This product has been specially designed to provide the best application of professional spray tanning solutions. Take a minute to read and understand how to operate your new Hush Sprinter™ tanning system and you will be able to provide the perfect tan with every application.
-
Page 4: General Safety Information
50’ cord……………………….………..10 or 12 Gauge 25’ cord……………………..…….10, 12, or 14 Gauge Disassemble or maintenance of the Hush Sprinter™ is to be conducted by an authorised technician only as this voids all warranty. 6. (See Chart 1) Figure 2 100’ cord………………………………………10 Gauge Chart 1 Extension Cord Requirements 50’... -
Page 5: Set Up And Operate Your Hush Sprinter™ Spray Tan System
1. Plug the PRINCESS tanning system unit into a proper electrical outlet. Make sure that the electric current 2. Next, locate the male end of the air hose and connect it to the female quick connect on the Hush Sprinter™ tanning you are connecting to is the same as your unit. -
Page 6: Prepare The Hush Optimiser™ Spray Gun
HUSH endura ™ SPRINTER Prepare the Hush Optimiser™ Spray Gun:... - Page 7 HUSH endura ™ SPRINTER Prepare the Hush Optimiser™ Spray Gun cont’d Fig. 6 b. Release the ring to allow the coupler to snap into place. The hose should now be connected to the unit Figure 7. Fig. 7 1. Follow the diagram to prepare the Hush Optimiser™ Spray Gun c.
- Page 8 How to mist in a spot or circle 2. Next, position the Hush Sprinter™ unit as far away as practical and possible from the area where you will be spraying. 3. Attach the remaining end of the hose to the Hush Optimiser™ Spray Gun as follows: a.
-
Page 9: Adjusting The Hush Optimiser™ Spray Gun
HUSH endura ™ SPRINTER Set up and operate your PRINCESS Tanning System: 4. Adjusting the Hush Optimiser™ Spray Gun 1. Plug the PRINCESS tanning system unit into a proper electrical outlet. Make sure that the electric current you are connecting to is the same as your unit. (110v or 220v). DO NOT attempt to connect the unit to the wrong 1. -
Page 10: Spraying
Spraying/Misting 2. The ON/OFF Switch is located at the side of the Hush Sprinter™ Unit. Turn it on. You will hear a sound similar to a vacuum cleaner. You may also notice that air is now blowing out of the front of the Hush Sprinter™ Spray Gun. This is a. -
Page 11: Maintenance
6. Maintenance 1. Hush Sprinter™ Unit. a. There is minimal maintenance to perform on the Hush Sprinter™ unit. Make sure you keep the motor unit as far away from your spraying area as possible. b. Every night wipe over Hush Sprinter™ unit with a damp cloth. - Page 12 When using spray tan in your Hush Optimiser ™ spray gun it can leave a build-up of residue that, overtime, can clog your Hush Optimiser ™ spray gun tip and interfere with the effectiveness of your spray pattern. Mediterranean Tan’s Airbrush Cleaner is specifically developed to breakdown the residue left in your airbrush tip or spray gun nozzle.
-
Page 13: Troubleshooting
• Turn Hush Sprinter™ unit OFF. Remove air cap ring (#1-1, Diagram on page 6) remove air cap (#1-2, Diagram on page 6) remove the needle (#20, Diagram on page 6) remove nozzle (#2, Diagram on page 6) with an adjustable wrench or spanner which is supplied at purchase. - Page 14 HUSH endura ™ SPRINTER 7. Hush Optimiser™ Spray Gun Problems...
- Page 15 HUSH endura ™ SPRINTER RECORD OF Hush Sprinter™ USE MODEL SERIAL# DATE PURCHASED DATE HOURS OF USE TOTAL HOURS...
- Page 16 HUSH endura ™ SPRINTER RECORD OF Hush Sprinter™ MAINTENANCE DATE MAINTENANCE PERFORMED...
Need help?
Do you have a question about the HUSH SPRINTER and is the answer not in the manual?
Questions and answers