Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Cartft Manuals
  4. Security Camera
  5. CTFCAM-1 Series
  6. Quick operation manual

Cartft CTFCAM-1 Series Quick Operation Manual

Ip hd camera
Hide thumbs

Advertisement

Quick Links

Download this manual
IP HD DOME CAMERA
QUICK OPERATION GUIDE

Advertisement

loading
Need help?

Need help?

Do you have a question about the CTFCAM-1 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Cartft CTFCAM-1 Series

  • Page 1 IP HD DOME CAMERA QUICK OPERATION GUIDE...
  • Page 2 1. How to modify the IP address of PTZ Current there is two method on modifying PTZ IP address: one via website; another one via search tools. Modify the PTZ IP address via IE website 1.1 set the computer network for connection testing The PTZ camera default IP address is 192.168.1.18 ,so need to set the computer IP address in the same segment.
  • Page 3 1.2 IE login Open the IE browser, in the tools / security / custom level (C)... make the"ActiveX control and interpolation"all select "enable" or "tip", also make the security level to low. Input the network PTZ IP address (factory Default IP address: 192.168.1.18) then click”Enter”, which will appear the browser landing interface.
  • Page 4 After the first time to enter the login interface, it will appear”Click here to download the plugin, please close the browser when installation”tip as the follow diagram,click to install the plugin. Last click to download the controls : install and run this controls once it was downloaded.
  • Page 5 Mark: you also can use ONVIF test tools(ONVIF Device Manager” to search the PTZ IP address.

  • Page 6: Operation Method

    2. Operation method 2.1 Network PTZ camera connection Network PTZ camera default IP address: 192.168.1.18, user name: admin, pass word:admin;Normally working voltage under DC12V/4A±10% or POE, the connection in LAN as below: 2.2 Search and add IP address Network ptz camera fast access can use the search function in the support software. Using search function automatically search the IP address of the network ptz camera in the same LAN.
  • Page 7 Mark: you also can use ONVIF test tools(ONVIF Device Manager” to search the PTZ IP address.

  • Page 8: Set The Ptz Camera Preset

    3. Take NVR which support ONVIF to add devices Take NVR which support ONVIF to add ptz, the main attention is the ONVIF port, user name and password these three items are to be kept consistent. PTZ ONVIF port can be seen on the IE Figure: Mark: the IP address of the NVR and the PTZ camera should be in the same LAN.

  • Page 10: Function Commands

    5. Function commands Function Control mode Remarks The first cruising line (1 to 16 preset Call the 41 preset point points) The second cruising line (17 to 32 Call the 42 preset point preset points) The third cruising line (65 to 80 Call the 43 preset point...
  • Page 11 Call the 105 preset point to make it on or Idle action switch Default: Off set the 105 preset point to make it off. Menu Call 95or press [OPEN+] Initialization (restore factory defaults) Set 40 Back to the sensor location (reset) Call 34 6.